Difficulty

Moderate

Steps

10

Time Required

Suggest a time??

Sections

4

  • Back Cover
  • 4 steps
  • Speaker
  • 2 steps
  • Battery
  • 2 steps
  • Motherboard
  • 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackGarmin nuvi 2460 LMT

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Cover
  • Using a T5 Torx Screwdriver, begin unscrewing the four 11.0 mm screws from the back panel.

Using a T5 Torx Screwdriver, begin unscrewing the four 11.0 mm screws from the back panel.

1024

Step 2

  • Using a plastic opening tool or similar object, find the groove in the side of the device and begin prying open the back panel. Work the tool around the entire panel until it pops off.

Using a plastic opening tool or similar object, find the groove in the side of the device and begin prying open the back panel. Work the tool around the entire panel until it pops off.

Step 3

  • Lift the beige clamp using a tweezer or your fingernail and remove the connector.

Lift the beige clamp using a tweezer or your fingernail and remove the connector.

Step 4

  • Lift the connector gently from the socket, making sure you pull in the right direction.

Lift the connector gently from the socket, making sure you pull in the right direction.

Step 5

              Speaker
  • Lift and separate the speaker connector cable using a pair of tweezers.

Lift and separate the speaker connector cable using a pair of tweezers.

Step 6

  • Gently lift the speaker out of the back cover using a plastic opening tool.
  • Apply force as needed if there is glue holding the speaker in place.

Gently lift the speaker out of the back cover using a plastic opening tool.

Apply force as needed if there is glue holding the speaker in place.

Step 7

              Battery
  • Using a pair of tweezers, grab the connecting wires and lift the terminal from the motherboard.
  • Avoid contacting battery terminals with metallic objects.

Using a pair of tweezers, grab the connecting wires and lift the terminal from the motherboard.

Avoid contacting battery terminals with metallic objects.

Step 8

  • Pry the battery out of the back cover using a plastic opening tool.
  • Work the edges and apply force when removing the battery, as it will be glued down.

Pry the battery out of the back cover using a plastic opening tool.

Work the edges and apply force when removing the battery, as it will be glued down.

Step 9

              Motherboard
  • Using a T5 Torx Screwdriver, unscrew the 5 screws holding the motherboard in place.

Using a T5 Torx Screwdriver, unscrew the 5 screws holding the motherboard in place.

Step 10

  • Tilt and slide the motherboard out of the back cover.

Tilt and slide the motherboard out of the back cover.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Ricardo Audain

Member since: 09/07/2016

623 Reputation

                                      5 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges

Team

                       USF Tampa, Team 6-4, Remmell Fall 2016                        

                                                  Member of USF Tampa, Team 6-4, Remmell Fall 2016 



                    USFT-REMMELL-F16S6G4                     


                                            4 Members                     


                                            7 Guides authored