Difficulty

Moderate

Steps

6

Time Required

                          15 - 20 minutes

Sections

2

  • Rear Casing
  • 3 steps
  • Speaker
  • 3 steps

Flags

0

  • BackGarmin Nuvi 200

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Rear Casing
  • Peel off the sticker from the bottom of the device to reveal two screws.

Peel off the sticker from the bottom of the device to reveal two screws.

1024

Step 2

  • Remove two T5 Torx screws.

Remove two T5 Torx screws.

Step 3

  • Insert a plastic opening tool in the gap between the front and rear casing.
  • Carefully work the tool around the gap, separating the two halves of the case.
  • Keep the power switch in place while removing the rear case.

Insert a plastic opening tool in the gap between the front and rear casing.

Carefully work the tool around the gap, separating the two halves of the case.

Keep the power switch in place while removing the rear case.

Step 4

              Speaker
  • Unscrew the two screws on opposite sides of the speaker using the #00 Phillips screwdriver.

Unscrew the two screws on opposite sides of the speaker using the #00 Phillips screwdriver.

Step 5

  • Pull the cable out to detach the speaker from the logic board.

Pull the cable out to detach the speaker from the logic board.

Step 6

  • Wedge the iPod opener into the space between the speaker and the case.
  • Apply pressure to pry the speaker away from the case.

Wedge the iPod opener into the space between the speaker and the case.

Apply pressure to pry the speaker away from the case.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Anjelica

Member since: 04/11/2010

564 Reputation

                                      3 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       Cal Poly, Team 25-90, Amido Spring 2010                        

                                                  Member of Cal Poly, Team 25-90, Amido Spring 2010 



                    CPSU-AMIDO-S10S25G90                     


                                            4 Members                     


                                            9 Guides authored

randaleholland - Nov 8, 2012

Reply

just a note i had a problem with the speaker in my nuvi 200 an upon opening up found speaker plug had come loose i guess from being dropped a few times pushed plug in an works fine please check all connections before replacing your speaker saved me $$ thanks for a great site everyone…

Brat Fry - Aug 17, 2015

Reply

Where can you buy replacement speakers for the Garmin units?