Difficulty
Moderate
Steps
4
Time Required
5 - 25 minutes
Sections
1
- Touch Screen
- 4 steps
Flags
0
BackGarmin Nuvi 1390LMT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Touch Screen
- Snap the plastic cover off using a plastic opening tool.
Snap the plastic cover off using a plastic opening tool.
1024
Step 2
- Remove the four black 11 mm T5 torx screws.
Remove the four black 11 mm T5 torx screws.
Step 3
- Pop the screen cover off with a plastic opening tool.
Pop the screen cover off with a plastic opening tool.
Step 4
- Gently pull the wire ribbon connecting the screen to the logic board from the plug.
- Be careful when unplugging the wire ribbon. It is very fragile.
Gently pull the wire ribbon connecting the screen to the logic board from the plug.
Be careful when unplugging the wire ribbon. It is very fragile.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 1 other contributor
Trey Ulsh
Member since: 10/22/2015
537 Reputation
3 Guides authored
Badges:
9
+6 more badges
Team
Montana Tech, Team 10-4, Shirk Fall 2015
Member of Montana Tech, Team 10-4, Shirk Fall 2015
MTUM-SHIRK-F15S10G4
5 Members
3 Guides authored