Difficulty
Easy
Steps
5
Time Required
5 minutes
Sections
2
- Back Cover and AA Batteries
- 3 steps
- Gasket
- 2 steps
Flags
0
BackGarmin GPSmap 60CSx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Back Cover and AA Batteries
- Lift and twist the battery cover release 90 degrees counterclockwise on the back of the device.
Lift and twist the battery cover release 90 degrees counterclockwise on the back of the device.
1024
Step 2
- Lift battery release up to remove battery cover.
Lift battery release up to remove battery cover.
Step 3
- Pull AA batteries out.
Pull AA batteries out.
Step 4
Gasket
- Remove the six 10 mm screws on the back of the device with a Phillips #0 Screwdriver.
- Separate the back panel from the front.
Remove the six 10 mm screws on the back of the device with a Phillips #0 Screwdriver.
Separate the back panel from the front.
Step 5
- Remove the gasket.
- Be careful to make sure the gasket is aligned correctly to ensure it is water proof.
Remove the gasket.
Be careful to make sure the gasket is aligned correctly to ensure it is water proof.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Samantha Shelton
Member since: 04/05/2018
179 Reputation
1 Guide authored
Badges:
5
+2 more badges
Team
Linn Benton Community College, Team S2-G5, Johnson Spring 2018
Member of Linn Benton Community College, Team S2-G5, Johnson Spring 2018
LBCC-JOHNSON-S18S2G5
5 Members
5 Guides authored
