Difficulty
Easy
Steps
2
Time Required
10 - 15 minutes
Sections
1
- Display
- 2 steps
Flags
0
BackGarmin fenix 6X Sapphire
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Display
- Orient the watch so that the screen is face up.
- Remove the five 6 mm black screws from the perimeter of the watch face using the T5 Torx screwdriver.
Orient the watch so that the screen is face up.
Remove the five 6 mm black screws from the perimeter of the watch face using the T5 Torx screwdriver.
1024
Step 2
- Carefully lift up the watch face as it’s attached to the motherboard by a ribbon connector.
- Detach the black connector from the motherboard.
- A spudger can be used if you have trouble prying the piece with your fingers.
- Don’t pull on the ribbon as it could tear.
- When the ribbon is disconnected remove the watch face.
Carefully lift up the watch face as it’s attached to the motherboard by a ribbon connector.
Detach the black connector from the motherboard.
A spudger can be used if you have trouble prying the piece with your fingers.
Don’t pull on the ribbon as it could tear.
When the ribbon is disconnected remove the watch face.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
matthew long
Member since: 02/22/2022
448 Reputation
5 Guides authored
Badges:
7
+4 more badges
Team
Clemson, Team 1-5, Hunter Spring 2022
Member of Clemson, Team 1-5, Hunter Spring 2022
CLEM-HUNTER-S22S1G5
4 Members
5 Guides authored