Garmin Fenix 6X Sapphire Back Cover Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Back Cover
2 steps

Flags

BackGarmin fenix 6X Sapphire
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

A heat gun can be useful for removing the back cover as it is glued to the body of the watch but be careful when using the heat gun. Please use with caution. The high setting can ignite flammable items and may cause burns if aimed at your skin or clothing. Heat guns may produce residual smoke when turned off the first few times and should always be used in a well-ventilated area.

What you need

Step 1

              Back Cover

Flip the watch so the face is down.
Remove the five 6 mm T5 Torx screws on the back of the watch.

Flip the watch so the face is down.

Remove the five 6 mm T5 Torx screws on the back of the watch.

1024

Step 2

Use a spudger to pry the back cover of the watch off by placing it under the seam of the back case.
The back cover is glued on and may be difficult to remove. It might help to heat the back cover before prying in order to soften the glue. If doing so, be careful to not burn yourself.
This step requires a good bit of force to pry or apply heat back cover off because the back cover is glued. Be careful not to the break cover from too much force.

Use a spudger to pry the back cover of the watch off by placing it under the seam of the back case.

The back cover is glued on and may be difficult to remove. It might help to heat the back cover before prying in order to soften the glue. If doing so, be careful to not burn yourself.

This step requires a good bit of force to pry or apply heat back cover off because the back cover is glued. Be careful not to the break cover from too much force.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    matthew long

Member since: 02/22/2022

448 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Clemson, Team 1-5, Hunter Spring 2022                        

                                                  Member of Clemson, Team 1-5, Hunter Spring 2022 



                    CLEM-HUNTER-S22S1G5                     


                                            4 Members                     


                                            5 Guides authored

Introduction#

What you need#

#

#

#

#

Team#

#

Introduction

What you need

Team