Difficulty

Moderate

Steps

8

Time Required

Suggest a time??

Sections

1

  • Motherboard
  • 8 steps

Flags

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackGarmin Fenix 3 HR

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Remove the five 7mm screws with H1.3 hex screwdriver.

Remove the five 7mm screws with H1.3 hex screwdriver.

1024

Step 2

  • Use a plastic opening tool to remove the face of the device to expose the inner components.
  • There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well.
  • Be careful of the ribbon that connects the motherboard to the display.

Use a plastic opening tool to remove the face of the device to expose the inner components.

There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well.

Be careful of the ribbon that connects the motherboard to the display.

Step 3

  • Disconnect this ribbon from the motherboard using tweezers.

Disconnect this ribbon from the motherboard using tweezers.

Step 4

  • Using a T5 screwdriver, remove the two 5mm screws.
  • The motherboard should move freely.

Using a T5 screwdriver, remove the two 5mm screws.

The motherboard should move freely.

Step 5

  • Another ribbon is attached from the underside of the motherboard. Disconnect this ribbon.

Another ribbon is attached from the underside of the motherboard. Disconnect this ribbon.

Step 6

  • Disconnect wires connecting battery to motherboard.

Disconnect wires connecting battery to motherboard.

Step 7

  • The battery is glued to the motherboard and will need pried off with a nylon spudger.

The battery is glued to the motherboard and will need pried off with a nylon spudger.

Step 8

  • Now attach battery to new motherboard and reassemble.

Now attach battery to new motherboard and reassemble.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 2 other contributors 


                    Jacob Smiley

Member since: 03/26/2018

277 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       IUPUI, Team S1-G6, Harley Spring 2018                        

                                                  Member of IUPUI, Team S1-G6, Harley Spring 2018 



                    IUPUI-HARLEY-S18S1G6                     


                                            3 Members                     


                                            4 Guides authored

jonathan.hatchuel - Jan 20, 2019

Reply

And where would one source replacement motherboard?

luis zavala - May 10, 2019

Reply

donde puedo encontras placa.madre reeemplazo????