Student-Contributed Wiki

An awesome team of students from our education program made this wiki.

The product will not power on and shows no signs of charging.

If the Garmin Edge battery is functioning properly, but the device will not charge, the issue may be with the device itself. This particular device can be charged via the wall outlet or a USB port. First, ensure that both of these options are fully functional. If the issue is not resolved with a functioning charger, it is likely that the issue is caused by a faulty or broken charging port. If the charging port is broken, follow the instructions found on the Garmin Edge 530 Charging Port Replacement to replace it.

If the Garmin Edge will not turn on despite being connected to a functional charging device, the issue may be found in the battery. The Garmin Edge 530 uses a built-in lithium ion battery. For further information on replacing this part view the Garmin Edge 530 Battery Replacement page.

Device is not pairing with smartphone and returning error messages.

The Garmin Edge 530 and your smartphone cannot pair if Bluetooth is not turned on. Make sure that Bluetooth is enabled on both devices before attempting to connect the devices.

Sometimes restarting both devices will help to sync up their connectivity. First, turn off the smartphone and the Garmin Edge 530, wait a few seconds, and then turn them back on again.

If the Garmin Edge 530 and your smartphone are not connecting after ensuring bluetooth is enabled and doing a restart, you may have to retry the pairing process by removing the Garmin Edge 530 from the Garmin Connect app and the bluetooth settings on your smartphone. The steps are as follows:

  • Open the Garmin Connect app and go to More (or Menu for android devices), select Garmin Devices > Garmin Edge 530 > “Remove” > confirm device removal.Go to your smartphone’s bluetooth settings, select the Garmin Edge 530 in the list of devices, and select “forget this device” (or “unpair” for android).On the Edge 530, go to Menu > Phone > select the name of your phone > Forget Phone.To reconnect the devices and re-enter pairing mode, go back into the Garmin Connect app and select More (or Menu), select Garmin Devices > Add Device to re-add the Garmin Edge 530.Place the Garmin Edge 530 into pairing mode by going to Menu > Settings > Connected Features > Phone > Pair Smartphone.Go back into the Garmin Connect app and select “Start” or “Connect it,” inputting the 6 digit pin when prompted, syncing the devices.

The device will not stay connected to the mount.

Many times, the mount used to secure the Garmin Edge 530 in place during a ride will fail. If you notice your device coming disconnected from the mount, notice visible defects in the mount, or see that the mount itself is disconnecting from your bike, you may have a faulty mount.

Summary: If the mount itself is not at fault, you may have a defect in the back cover of your Garmin Edge. Look for obvious breaking or warping of back structures. If the piece is broken, follow instructions found on the Garmin Edge 530 Back Cover Replacement to replace the faulty part.

Screen will not turn on or display information despite being fully charged.

Look for any visible defects to the screen, any deep scratches, or obvious breaks. If the screen is in need of repair, follow Garmin Edge 530 LCD Screen Display Replacement to find step-by-step instructions.

Sometimes the internal parts of the Garmin Edge 530 that work to make up the LCD screen display of the device will break or go bad. If this is the case, there should be no visible defects in the screen, the device will turn on and fully charge, but the screen will remain dark or blank. Make sure that the screen is not in need of repair before troubleshooting the internal display. If the display is no longer functional, follow the Garmin Edge 530 LCD Screen Display Replacement to replace the faulty part.

There may be issues with the motherboard connecting to the internal LCD screen display or is faulty over time. If you notice the screen is turning on and lighting up, but is returning a blank white screen at a dimmer brightness, while the screen has no defects and is able to charge, the issue may lie with the motherboard. Make sure that the internal LCD screen display is not in need of repair before troubleshooting the motherboard. If the motherboard is in need of replacement, follow the Garmin Edge 530 Motherboard Replacement for step-by-step instructions.

Indicated elevation and grade are inaccurate during rides.

If the Garmin Edge 530 is returning inaccurate elevation and grade readings while all other functions are operational, especially after exposure to water, the barometric altimeter may be wet. The barometric altimeter is housed on the back of the Garmin Edge 530 behind two small hole openings located above the serial number. To remove moisture from the barometric altimeter, take a hairdryer and gently apply heat to the small openings. The device can also be placed in rice to remove moisture from this area.

If The Garmin Edge 530 has not been exposed to moisture but is still returning inaccurate elevation and grade readings, the small openings may be blocked with dust and debris. To remove this, use compressed air to gently blow the dust and debris out from the openings.