Garmin Edge 530 Lcd Screen Display Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 20 minutes

Sections

LCD Screen Display
4 steps

Flags

BackGarmin Edge 530
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

The LCD screen display assembly is made up of the glass panel (commonly thought of as the screen), a digitizer sheet, and the LCD component which utilizes a backlight to supply light which then passes through a crystal element to polarize the light and create pixels. The display may need to be replaced if the screen is cracked or broken, affecting the display assembly. Or, if the screen is remaining black or blank, indicating issues with connections to the display or components to the LCD itself.

In this guide, you will have to pry up the glass panel with a metal spudger. It is important to note the potential broken glass hazard when prying the screen from the back cover. After this step, use ESD-safe tools to avoid damage to the rest of the device and protect it from electrostatic discharge.

What you need

Step 1

              LCD Screen Display

Insert the metal spudger between the edge of the device screen and back cover.
Begin to pry along the perimeter between the device screen and back cover.

Insert the metal spudger between the edge of the device screen and back cover.

Begin to pry along the perimeter between the device screen and back cover.

1024

Step 2

Use the nylon halberd spudger to lift the edge of the screen and begin separating it from the back cover.
Removing the screen can potentially cause the glass to crack and potential injury. Do this carefully.

Use the nylon halberd spudger to lift the edge of the screen and begin separating it from the back cover.

Removing the screen can potentially cause the glass to crack and potential injury. Do this carefully.

Step 3

Peel back the tape holding down the orange ribbon cables with the nylon halberd spudger.

Peel back the tape holding down the orange ribbon cables with the nylon halberd spudger.

Step 4

Completely detach the screen from the back cover by disconnecting the orange ribbon cables.
Be sure to reconnect the orange ribbon cables from the new LCD screen at the original attachment site.

Completely detach the screen from the back cover by disconnecting the orange ribbon cables.

Be sure to reconnect the orange ribbon cables from the new LCD screen at the original attachment site.

To reassemble your device, follow these instructions in reverse order to attach the new LCD screen.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Caroline Abbud

Member since: 02/22/2022

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       Clemson, Team 2-1, Hunter Spring 2022                        

                                                  Member of Clemson, Team 2-1, Hunter Spring 2022 



                    CLEM-HUNTER-S22S2G1                     


                                            5 Members                     


                                            8 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team