Difficulty
Easy
Steps
2
Time Required
5 minutes
Sections
1
- Back Cover
- 2 steps
Flags
0
BackGarmin Edge 1000
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
The back cover houses the device’s SIM card and battery as well. This guide can be used to gain access to these components as needed.
What you need
Step 1
Back Cover
- Be sure the device is properly powered all the way off before starting the replacement.
- Hold the device front side down. Remove the eight T6 Torx screws along the backside of the device.
- Pull the front side of the device apart from the back side.
Be sure the device is properly powered all the way off before starting the replacement.
Hold the device front side down. Remove the eight T6 Torx screws along the backside of the device.
Pull the front side of the device apart from the back side.
1024
Step 2
- Disconnect the bronze SIM card flex cable from the motherboard with your finger.
- Disconnect the battery cord to completely separate the front cover from the back cover of the device with your finger.
Disconnect the bronze SIM card flex cable from the motherboard with your finger.
Disconnect the battery cord to completely separate the front cover from the back cover of the device with your finger.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Taylor McNees
Member since: 10/03/2019
558 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Eastern Washington University, Team S1-G2, Al-Hmeyrat Fall 2019
Member of Eastern Washington University, Team S1-G2, Al-Hmeyrat Fall 2019
EWU-AL-HMEYRAT-F19S1G2
3 Members
4 Guides authored