Difficulty

Moderate

Steps

4

Time Required

                          5 minutes            

Sections

1

  • Speaker
  • 4 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackGarmin Drive 60LM

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker               
  • Using the T4 Torx screwdriver, unscrew all four of the screws (1/4 inch, 6.35 mm) from the back panel of your device.

Using the T4 Torx screwdriver, unscrew all four of the screws (1/4 inch, 6.35 mm) from the back panel of your device.

1024

Step 2

  • Remove the back panel using the metal spudger tool.
  • You will not be able to remove the back panel entirely. Make sure to separate the back panel slowly so that you do not rip the orange ribbon inside.
  • The metal spudger tool can cause damage to internal components.
  • Flip the device over with the screen facing upward and open the device.

Remove the back panel using the metal spudger tool.

You will not be able to remove the back panel entirely. Make sure to separate the back panel slowly so that you do not rip the orange ribbon inside.

The metal spudger tool can cause damage to internal components.

Flip the device over with the screen facing upward and open the device.

Step 3

  • Use a plastic spudger tool to lift the wires from behind the motherboard.
  • Carefully disconnect the wires attaching the speaker to the motherboard using your fingers.

Use a plastic spudger tool to lift the wires from behind the motherboard.

Carefully disconnect the wires attaching the speaker to the motherboard using your fingers.

Step 4

  • Using a plastic spudger and your fingers, remove the speaker from the device.

Using a plastic spudger and your fingers, remove the speaker from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 5 other contributors 

                    Andy Flores                     

Member since: 01/30/2017

238 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Baylor, Team 3-3, Whitney Spring 2017                        

                                                  Member of Baylor, Team 3-3, Whitney Spring 2017 



                    BU-WHITNEY-S17S3G3                     


                                            4 Members                     


                                            3 Guides authored