Garmin Drive 60Lm Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          15 minutes

Sections

Motherboard
5 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

BackGarmin Drive 60LM
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Motherboard

Using the T4 Torx screwdriver, unscrew all four of the screws (1/4 inch, 6.35 mm) from the back panel of your device.

Using the T4 Torx screwdriver, unscrew all four of the screws (1/4 inch, 6.35 mm) from the back panel of your device.

1024

Step 2

Remove the back panel using the metal spudger tool.
The metal spudger tool can cause damage to internal components.
Flip the device over with the screen facing upward and open the device.

Remove the back panel using the metal spudger tool.

The metal spudger tool can cause damage to internal components.

Flip the device over with the screen facing upward and open the device.

Step 3

Use a plastic spudger to flip up the white clamp holding the orange ribbon in place to the motherboard.
Lift the screen and orange ribbon away from the motherboard.
The metal spudger pictured is not ESD safe. Use a plastic spudger instead.

Use a plastic spudger to flip up the white clamp holding the orange ribbon in place to the motherboard.

Lift the screen and orange ribbon away from the motherboard.

The metal spudger pictured is not ESD safe. Use a plastic spudger instead.

Step 4

Using the T4 Torx screwdriver, unscrew the four screws (1/2 cm, 5mm) from the motherboard.
Then, lift the motherboard out of its position.

Using the T4 Torx screwdriver, unscrew the four screws (1/2 cm, 5mm) from the motherboard.

Then, lift the motherboard out of its position.

Step 5

Flip the motherboard over towards the right.
Then, carefully disconnect the two sets of wires that are connected to the battery and the speaker using your fingers.
Remove the motherboard.

Flip the motherboard over towards the right.

Then, carefully disconnect the two sets of wires that are connected to the battery and the speaker using your fingers.

Remove the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Andy Flores

Member since: 01/30/2017

238 Reputation

                                      2 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Baylor, Team 3-3, Whitney Spring 2017                        

                                                  Member of Baylor, Team 3-3, Whitney Spring 2017 



                    BU-WHITNEY-S17S3G3                     


                                            4 Members                     


                                            3 Guides authored

th.lamouroux - Jul 27, 2020

Bonjour, ou trouver la carte mère ?

Hello, where can I find the motherboard?

Incorrect Tools#

Introduction#

What you need#

Team#

Incorrect Tools

Introduction

What you need

Team