Difficulty
Moderate
Steps
4
Time Required
15 - 20 minutes
Sections
2
- Motherboard
- 3 steps
- Speaker
- 1 step
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackGarmin Drive 52 and Traffic
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motherboard
- Pop the suction cup off of the device.
- Unscrew the four T5 Torx screws on the back.
- Carefully pry apart the front and back with a Jimmy.
Pop the suction cup off of the device.
Unscrew the four T5 Torx screws on the back.
Carefully pry apart the front and back with a Jimmy.
1024
Step 2
- With the top in hand, carefully apply pressure on the top of the screen to pop it out of the front of the case.
With the top in hand, carefully apply pressure on the top of the screen to pop it out of the front of the case.
Step 3
- Remove the four Torx T5 screws.
- Unplug the two connectors from the motherboard and lift it up and out.
Remove the four Torx T5 screws.
Unplug the two connectors from the motherboard and lift it up and out.
Step 4
Speaker
- Gently lift the speaker out.
Gently lift the speaker out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Jason Wilson
Member since: 10/26/2022
361 Reputation
4 Guides authored
Badges:
3
Team
UMass Dartmouth, Team 1-2, Petersen Fall 2022
Member of UMass Dartmouth, Team 1-2, Petersen Fall 2022
UMASSD-PETERSEN-F22S1G2
6 Members
4 Guides authored
