Difficulty

Moderate

Steps

3

Time Required

                          3 minutes

Sections

1

  • Screen
  • 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackGarmin Drive 52 and Traffic

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen
  • Pop the suction cup off of the device.
  • Unscrew the four T5 Torx screws on the back.
  • Carefully pry apart the front and back with a Jimmy.

Pop the suction cup off of the device.

Unscrew the four T5 Torx screws on the back.

Carefully pry apart the front and back with a Jimmy.

1024

Step 2

  • Pop the screen out of the front casing.

Pop the screen out of the front casing.

Step 3

  • Flip up the ZIF connector’s lock bar, remove the ribbon cable, and pull the screen out.

Flip up the ZIF connector’s lock bar, remove the ribbon cable, and pull the screen out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Jason Wilson

Member since: 10/26/2022

361 Reputation

                                      4 Guides authored                  



                       Badges:
                       3

Team

                       UMass Dartmouth, Team 1-2, Petersen Fall 2022                        

                                                  Member of UMass Dartmouth, Team 1-2, Petersen Fall 2022 



                    UMASSD-PETERSEN-F22S1G2                     


                                            6 Members                     


                                            4 Guides authored