Difficulty
Easy
Steps
3
Time Required
3 minutes
Sections
1
- Battery
- 3 steps
Flags
Better Introduction
Improve this guide by completing or revising its introduction.
BackGarmin Drive 52 and Traffic
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Use a T5 Torx screwdriver to remove the four screws in the corners of the backside of the device.
- If necessary, use a Jimmy or other pry tool to open the backside of the device.
Use a T5 Torx screwdriver to remove the four screws in the corners of the backside of the device.
If necessary, use a Jimmy or other pry tool to open the backside of the device.
1024
Step 2
- Once the back side is open, flip the ZIF connector’s lock bar up then remove the connector.
Once the back side is open, flip the ZIF connector’s lock bar up then remove the connector.
Step 3
- Use a T5 Torx screwdriver to unscrew the four screws securing the motherboard.
- Gently detach the wiring from the motherboard and left the motherboard out.
- Use a nylon spudger to gently lift the battery out.
- Avoid using metal spudgers near batteries; puncturing or excessively warping batteries can be dangerous.
Use a T5 Torx screwdriver to unscrew the four screws securing the motherboard.
Gently detach the wiring from the motherboard and left the motherboard out.
Use a nylon spudger to gently lift the battery out.
Avoid using metal spudgers near batteries; puncturing or excessively warping batteries can be dangerous.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Jason Wilson
Member since: 10/26/2022
361 Reputation
4 Guides authored
Badges:
3
Team
UMass Dartmouth, Team 1-2, Petersen Fall 2022
Member of UMass Dartmouth, Team 1-2, Petersen Fall 2022
UMASSD-PETERSEN-F22S1G2
6 Members
4 Guides authored