Difficulty

Moderate

Steps

6

Time Required

                          10 minutes

Sections

2

  • Back Panel Removal
  • 3 steps
  • Screen
  • 3 steps

Flags

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackGarmin Dezl 770LMT

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Panel Removal
  • Turn the device screen down and using the screwdriver remove all eight screws from the back plate.

Turn the device screen down and using the screwdriver remove all eight screws from the back plate.

1024

Step 2

  • Place a nylon spudger in the seam between the front and back panel and carefully lift around the edge of the device.

Place a nylon spudger in the seam between the front and back panel and carefully lift around the edge of the device.

Step 3

  • Use the spudger to pry apart the screen from all around the device.
  • Gently lift the screen so not to disconnect the ribbon attaching the screen to the motherboard.

Use the spudger to pry apart the screen from all around the device.

Gently lift the screen so not to disconnect the ribbon attaching the screen to the motherboard.

Step 4

              Screen
  • After you’ve removed the back cover, you will see a copper colored ribbon connected to a grey hinge.
  • Carefully remove the hinge from the cord using a spudger and the ribbon will come out.
  • The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.
  • Make sure to wear an anti-static wrist strap when handling the motherboard.

After you’ve removed the back cover, you will see a copper colored ribbon connected to a grey hinge.

Carefully remove the hinge from the cord using a spudger and the ribbon will come out.

The regular black nylon spudger should be used whenever possible, especially around sensitive internal components.

Make sure to wear an anti-static wrist strap when handling the motherboard.

Step 5

  • Now you have the screen, which is enclosed by another cover. Remove the eight screws that hold it in place.

Now you have the screen, which is enclosed by another cover. Remove the eight screws that hold it in place.

Step 6

  • Once the screws have been taken out, use a spudger to carefully remove the cover. With this cover removed, the screen is now completely exposed.

Once the screws have been taken out, use a spudger to carefully remove the cover. With this cover removed, the screen is now completely exposed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 3 other contributors 


                    Aleem Waris

Member since: 10/10/2016

146 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       USF Tampa, Team 1-3, Lacy Fall 2016                        

                                                  Member of USF Tampa, Team 1-3, Lacy Fall 2016 



                    USFT-LACY-F16S1G3                     


                                            4 Members                     


                                            5 Guides authored