Garmin Dezl 760Lmt Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 minutes

Sections

Back Panel
3 steps
Screen Ribbon Cable
2 steps
Screen
2 steps

Flags

BackGarmin Dezl 760LMT
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Back Panel

Using a Torx T6 Screwdriver, remove the ten 7mm screws from the back panel.

Using a Torx T6 Screwdriver, remove the ten 7mm screws from the back panel.

1024

Step 2

Using a metal spudger, pry the device apart.
To recombine them, line up the two halves of the device and press them together.

Using a metal spudger, pry the device apart.

To recombine them, line up the two halves of the device and press them together.

Step 3

Turn the device over, laying it on its back with the screen facing upwards.
Lift the front panel away from the silver part of the back panel.
Make sure not to rip the ribbon cable that is connected to the screen and the motherboard.

Turn the device over, laying it on its back with the screen facing upwards.

Lift the front panel away from the silver part of the back panel.

Make sure not to rip the ribbon cable that is connected to the screen and the motherboard.

Step 4

              Screen Ribbon Cable

Lift the screen opposite where the “GARMIN” logo is located. Remove the clear tape holding the ribbon cable to the motherboard.

Lift the screen opposite where the “GARMIN” logo is located. Remove the clear tape holding the ribbon cable to the motherboard.

Step 5

Find and lift the small grey hinge at the end of the ribbon cable.
When handling the motherboard, make sure to wear an anti-static wrist strap.

Find and lift the small grey hinge at the end of the ribbon cable.

When handling the motherboard, make sure to wear an anti-static wrist strap.

Step 6

              Screen

Using a Torx T5 screwdriver, unscrew the four 7mm screws from the back plate of the screen.

Using a Torx T5 screwdriver, unscrew the four 7mm screws from the back plate of the screen.

Step 7

Turn the screen over so that it is facing upwards.
Remove the front plate of the screen.
Lift the screen from its back casing.

Turn the screen over so that it is facing upwards.

Remove the front plate of the screen.

Lift the screen from its back casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Ryan Williams

Member since: 09/28/2016

751 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       USF Tampa, Team 4-2, Passmore Fall 2016                        

                                                  Member of USF Tampa, Team 4-2, Passmore Fall 2016 



                    USFT-PASSMORE-F16S4G2                     


                                            4 Members                     


                                            6 Guides authored

tempestrogue - Jun 5, 2017

where can one by the replacement screen

neilneves - Sep 5, 2018

Ebay sells these screens replacement - search online for “ZD070NA-03K “ or on google, even amazon sometimes has them. Its a hard to find screen so you will probably only get it from hong kong or china.

Introduction#

What you need#

Team#

Introduction

What you need

Team