Difficulty
Moderate
Steps
10
Time Required
30 minutes
Sections
2
- Internal Assembly
- 6 steps
- Screen
- 4 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackGarmin Dash Cam 20
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Internal Assembly
- Be sure to turn off the Dash Cam by pressing the power button.
Be sure to turn off the Dash Cam by pressing the power button.
1024
Step 2
- Rotate the Dash Cam to where the socket faces you.
- Remove the 9 mm screw using the Torx T6 screwdriver.
Rotate the Dash Cam to where the socket faces you.
Remove the 9 mm screw using the Torx T6 screwdriver.
Step 3
- Remove the Dash Cam socket piece.
Remove the Dash Cam socket piece.
Step 4
- Rotate the Dash Cam to where the product information faces you.
- Remove the two 5 mm screws using the Torx T5 screwdriver.
Rotate the Dash Cam to where the product information faces you.
Remove the two 5 mm screws using the Torx T5 screwdriver.
Step 5
- Remove top case from the bottom case.
- The compact nature of the casing requires use of the metal spudger for needed leverage.
Remove top case from the bottom case.
The compact nature of the casing requires use of the metal spudger for needed leverage.
Step 6
- Remove the two 5mm screws using the Torx T5 screwdriver
- By removing the screws, the metal battery frame will now become free from the rest of the device.
Remove the two 5mm screws using the Torx T5 screwdriver
By removing the screws, the metal battery frame will now become free from the rest of the device.
Step 7
Screen
- Use the Phillips screwdriver to remove the four 5mm screws.
Use the Phillips screwdriver to remove the four 5mm screws.
Step 8
- Use the metal spudger to remove metal plate from device. This will reveal the screen.
Use the metal spudger to remove metal plate from device. This will reveal the screen.
Step 9
- Use the metal spudger to remove screen from device.
Use the metal spudger to remove screen from device.
Step 10
- The screen is now detached.
The screen is now detached.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 1 other contributor
Jesse Hillman
Member since: 10/04/2016
757 Reputation
5 Guides authored
Badges:
14
+11 more badges
Team
USF Tampa, Team 2-1, Cagle Fall 2016
Member of USF Tampa, Team 2-1, Cagle Fall 2016
USFT-CAGLE-F16S2G1
4 Members
5 Guides authored
