Difficulty
Moderate
Steps
13
Time Required
30 minutes
Sections
2
- Internal Assembly
- 6 steps
- Motherboard Components
- 7 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackGarmin Dash Cam 20
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Internal Assembly
- Be sure to turn off the Dash Cam by pressing the power button.
Be sure to turn off the Dash Cam by pressing the power button.
1024
Step 2
- Rotate the Dash Cam to where the socket faces you.
- Remove the 9 mm screw using the Torx T6 screwdriver.
Rotate the Dash Cam to where the socket faces you.
Remove the 9 mm screw using the Torx T6 screwdriver.
Step 3
- Remove the Dash Cam socket piece.
Remove the Dash Cam socket piece.
Step 4
- Rotate the Dash Cam to where the product information faces you.
- Remove the two 5 mm screws using the Torx T5 screwdriver.
Rotate the Dash Cam to where the product information faces you.
Remove the two 5 mm screws using the Torx T5 screwdriver.
Step 5
- Remove top case from the bottom case.
- The compact nature of the casing requires use of the metal spudger for needed leverage.
Remove top case from the bottom case.
The compact nature of the casing requires use of the metal spudger for needed leverage.
Step 6
- Remove the two 5mm screws using the Torx T5 screwdriver
- By removing the screws, the metal battery frame will now become free from the rest of the device.
Remove the two 5mm screws using the Torx T5 screwdriver
By removing the screws, the metal battery frame will now become free from the rest of the device.
Step 7
Motherboard Components
- This step shows the use of an incorrect tool. Always use an ESD safe tool, like a nylon spudger, when working with delicate internal components.
- Use the nylon spudger to pry the corner of the case off of the motherboard.
This step shows the use of an incorrect tool. Always use an ESD safe tool, like a nylon spudger, when working with delicate internal components.
Use the nylon spudger to pry the corner of the case off of the motherboard.
Step 8
- Remove the metal case off of the motherboard.
Remove the metal case off of the motherboard.
Step 9
- Remove the battery connection.
Remove the battery connection.
Step 10
- Remove the three 5 mm screws using the Torx T5 screwdriver.
Remove the three 5 mm screws using the Torx T5 screwdriver.
Step 11
- Use tweezers to remove the connector on the top right of the motherboard.
Use tweezers to remove the connector on the top right of the motherboard.
Step 12
- Remove the motherboard from the case and flip to reveal SD connection.
- Use tweezers to remove the connector next to the SD card slot.
Remove the motherboard from the case and flip to reveal SD connection.
Use tweezers to remove the connector next to the SD card slot.
Step 13
- The motherboard is now removed aside from the copper strip and its connector.
- Disconnect from the front case and the copper strip.
The motherboard is now removed aside from the copper strip and its connector.
Disconnect from the front case and the copper strip.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Jesse Hillman
Member since: 10/04/2016
757 Reputation
5 Guides authored
Badges:
14
+11 more badges
Team
USF Tampa, Team 2-1, Cagle Fall 2016
Member of USF Tampa, Team 2-1, Cagle Fall 2016
USFT-CAGLE-F16S2G1
4 Members
5 Guides authored
