Difficulty

Moderate

Steps

10

Time Required

                          25 - 30 minutes

Sections

4

  • Back Cover
  • 2 steps
  • Water Proof Gasket
  • 1 step
  • Screen
  • 6 steps
  • Motherboard
  • 1 step

Flags

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Missed a Step

Oops! This guide is currently missing some important steps.

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackGarmin Approach S2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.

Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.

1024

Step 2

  • Remove the back cover carefully.
  • Even after the screws have been removed, the back cover can still be quite difficult to take off. Moderate to extensive prying may be required. Be gentle, but firm.

Remove the back cover carefully.

Even after the screws have been removed, the back cover can still be quite difficult to take off. Moderate to extensive prying may be required. Be gentle, but firm.

Step 3

              Water Proof Gasket
  • Remove the orange gasket.

Remove the orange gasket.

Step 4

              Screen
  • Remove the screen and motherboard assembly from the case.

Remove the screen and motherboard assembly from the case.

Step 5

  • Use a metal spudger to remove the golden retaining clip from the screen. There will be some adhesive to break.

Use a metal spudger to remove the golden retaining clip from the screen. There will be some adhesive to break.

Step 6

  • Remove the screen from the golden metal clip.

Remove the screen from the golden metal clip.

Step 7

  • Unhinge the black retaining hinge by prying it open with the metal spudger; Your fingernails will work as well.

Unhinge the black retaining hinge by prying it open with the metal spudger; Your fingernails will work as well.

Step 8

  • Remove the connector from the motherboard by pulling it free at the base.
  • Make sure to pull from the base of the connector wire, as it is very easy to rip the wire from the screen.

Remove the connector from the motherboard by pulling it free at the base.

Make sure to pull from the base of the connector wire, as it is very easy to rip the wire from the screen.

Step 9

  • Remove the screen from the motherboard.
  • Notice our tape retaining the connector to the screen. This is so easy to rip!

Remove the screen from the motherboard.

Notice our tape retaining the connector to the screen. This is so easy to rip!

Step 10

              Motherboard
  • Remove the motherboard from the screen.

Remove the motherboard from the screen.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Evan Miller

Member since: 03/21/2018

247 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       IUPUI, Team S4-G1, Baechle Spring 2018                        

                                                  Member of IUPUI, Team S4-G1, Baechle Spring 2018 



                    IUPUI-BAECHLE-S18S4G1                     


                                            3 Members                     


                                            4 Guides authored