Gamestop Gs3 Gamecube Controller Joysticks Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          15 - 20 minutes            

Sections

1

• Joysticks
• 5 steps

Flags

0

• BackGameStop GS3 GameCube Controller

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Joysticks               

• Loosen and remove the 6 screws located on the back of the controller using your Phillips Screwdriver.

Loosen and remove the 6 screws located on the back of the controller using your Phillips Screwdriver.

1024

Step 2

• Carefully pry apart the top and bottom covers.

Carefully pry apart the top and bottom covers.

Step 3

• After separation, locate the rumble motor that is attached to the bottom cover of the controller.
• Loosen and remove the 2 screws that are holding the rumble motor in place.
• Lift and remove the rumble motor from the case.

After separation, locate the rumble motor that is attached to the bottom cover of the controller.

Loosen and remove the 2 screws that are holding the rumble motor in place.

Lift and remove the rumble motor from the case.

Step 4

• On the top cover of the controller, locate the green portion of the motherboard.
• Loosen and remove the 1 screw in the upper left side of the green motherboard.
• Turn the green motherboard over and attached to the motherboard will be the yellow c-stick.
• Firmly, but carefully, pull the c-stick off, and clean around the area before reattaching or replacing the c-stick.
• After cleaning or replacing the c-stick, reattach the green motherboard piece to the orange motherboard piece.

On the top cover of the controller, locate the green portion of the motherboard.

Loosen and remove the 1 screw in the upper left side of the green motherboard.

Turn the green motherboard over and attached to the motherboard will be the yellow c-stick.

Firmly, but carefully, pull the c-stick off, and clean around the area before reattaching or replacing the c-stick.

After cleaning or replacing the c-stick, reattach the green motherboard piece to the orange motherboard piece.

Step 5

• Finally, loosen and remove the 2 screws located on the orange motherboard.
• Pull up and remove the motherboard from the top cover. Then turn the motherboard over.
• Locate the gray joystick that is attached to the left side of the motherboard.
• Similarly to the yellow c-stick, firmly, but carefully, pull the gray joystick off, and clean around the area before reattaching or replacing the joystick.

Finally, loosen and remove the 2 screws located on the orange motherboard.

Pull up and remove the motherboard from the top cover. Then turn the motherboard over.

Locate the gray joystick that is attached to the left side of the motherboard.

Similarly to the yellow c-stick, firmly, but carefully, pull the gray joystick off, and clean around the area before reattaching or replacing the joystick.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 7 other contributors 

                    Andrew Gonsalves                     

Member since: 10/20/2016

226 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       UMass Dartmouth, Team 3-5, Isaacson Fall 2016                        

                                                  Member of UMass Dartmouth, Team 3-5, Isaacson Fall 2016 



                    UMASSD-ISAACSON-F16S3G5                     


                                            3 Members                     


                                            10 Guides authored