Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

  • Back Panel
  • 3 steps
  • Left and Right Trigger
  • 2 steps

Flags

3

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackGameStop GS3 GameCube Controller

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Back Panel
  • First, remove the 6 screws in the back panel and pull the back panel off.
  • Separate the halves of the controller. However, be careful when separating due to the little wires that could get mixed up.

First, remove the 6 screws in the back panel and pull the back panel off.

Separate the halves of the controller. However, be careful when separating due to the little wires that could get mixed up.

1024

Step 2

  • Next, remove the rumble motor by unscrewing the 2 screws connecting it.

Next, remove the rumble motor by unscrewing the 2 screws connecting it.

Step 3

  • Finally remove the screws holding in the right and left triggers. It’s easiest to hold the trigger together as shown in the third picture. Remove both the left and right trigger, and then you have successfully removed your back panel.

Finally remove the screws holding in the right and left triggers. It’s easiest to hold the trigger together as shown in the third picture. Remove both the left and right trigger, and then you have successfully removed your back panel.

Step 4

              Left and Right Trigger
  • Remove the screws holding the plastic bumper cover in place and remove it.

Remove the screws holding the plastic bumper cover in place and remove it.

Step 5

  • At this point you should be able to remove the bumper along with its spring from the controller.
  • Clean thoroughly underneath the bumper and remove any dirt or debris before reattaching.
  • To reassemble the device, follow these steps in reverse order.

At this point you should be able to remove the bumper along with its spring from the controller.

Clean thoroughly underneath the bumper and remove any dirt or debris before reattaching.

To reassemble the device, follow these steps in reverse order.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 


                    John Harrison

Member since: 10/28/2016

213 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team 3-5, Isaacson Fall 2016                        

                                                  Member of UMass Dartmouth, Team 3-5, Isaacson Fall 2016 



                    UMASSD-ISAACSON-F16S3G5                     


                                            3 Members                     


                                            10 Guides authored