Difficulty
Moderate
Steps
7
Time Required
15 - 45 minutes
Sections
2
- Disassembling Galaxy Tab S 10.5 Back Cover
- 3 steps
- Battery
- 4 steps
Flags
0
BackGalaxy Tab S 10.5
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Disassembling Galaxy Tab S 10.5 Back Cover
- Place the plastic opening tool into the SD card slot or charge port.
- Try in an upward motion until you see a separation between the tablet and back cover.
Place the plastic opening tool into the SD card slot or charge port.
Try in an upward motion until you see a separation between the tablet and back cover.
1024
Step 2
- Work around the entire device by sliding the plastic opening tool around the rim.
- If this is the first time, it will be hard to separate the back cover from the tablet.
- The clips are approximately 5 cm apart. While working around the device, the clips will make a dislocating sound when disconnected.
Work around the entire device by sliding the plastic opening tool around the rim.
If this is the first time, it will be hard to separate the back cover from the tablet.
The clips are approximately 5 cm apart. While working around the device, the clips will make a dislocating sound when disconnected.
Step 3
- Remove the back cover once all links have been separated.
- Be careful when touching any of the internal components of the tablet.
Remove the back cover once all links have been separated.
Be careful when touching any of the internal components of the tablet.
Step 4
Battery
- Using tweezers, peel back the green tape from the ZIF connectors on the two black ribbon cables.
- Use a plastic opening tool to lift up the plastic clips on the ZIF connectors.
Using tweezers, peel back the green tape from the ZIF connectors on the two black ribbon cables.
Use a plastic opening tool to lift up the plastic clips on the ZIF connectors.
Step 5
- Remove the six 2mm screws Phillips #000 screws surrounding the battery.
Remove the six 2mm screws Phillips #000 screws surrounding the battery.
Step 6
- Place the plastic opening tool between the frame and battery.
- Move the plastic opening tool in a downward motion, away from the battery to bring the battery out of the device.
Place the plastic opening tool between the frame and battery.
Move the plastic opening tool in a downward motion, away from the battery to bring the battery out of the device.
Step 7
- Hold the battery and disconnect the plug to remove the battery.
Hold the battery and disconnect the plug to remove the battery.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
80 other people completed this guide.
Author
with 6 other contributors
Jordan Soto
Member since: 08/26/2015
3,231 Reputation
6 Guides authored
Badges:
21
+18 more badges
Team
USF Tampa, Team 3-2, Eyestone Fall 2015
Member of USF Tampa, Team 3-2, Eyestone Fall 2015
USFT-EYESTONE-F15S3G2
3 Members
20 Guides authored
brianference - Feb 14, 2017
Reply
where is a good place to buy a replacement battery?
Miguel Ángel - Oct 24, 2017
Reply
Artículo muy positivo: pasos muy bien detallados. Me ha resultado fácil la el cambio de batería. Gracias por tu colaboración.
Jerry Belschner - Oct 29, 2017
Reply
Bought mine off of ebay
Markus - Jan 25, 2018
Reply
Great guide! Thanks a lot!
Barb - Mar 19, 2018
Reply
I bought a battery but am afraid to do the replacement myself. Where can I take the tablet to have it done?
’