Difficulty
Moderate
Steps
8
Time Required
30 minutes
Sections
1
- Furnace Humidifier Evaporator Pad
- 8 steps
Flags
0
BackHVAC
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Furnace Humidifier Evaporator Pad
- Turn off the humidifier. (Set the humidistat to 0% humidity)
Turn off the humidifier. (Set the humidistat to 0% humidity)
1024
Step 2
- Remove the nuts and clips holding the top cover of the cabinet assembly to the bottom cabinet housing.
Remove the nuts and clips holding the top cover of the cabinet assembly to the bottom cabinet housing.
Step 3
- Remove the side clips or fasteners.
Remove the side clips or fasteners.
Step 4
- Use an adjustable wrench to loosen the nut which holds the water distributor tube and swing the tube out of its secured place.
Use an adjustable wrench to loosen the nut which holds the water distributor tube and swing the tube out of its secured place.
Step 5
- Remove the top of the bottom cabinet housing and take out the evaporator pad.
Remove the top of the bottom cabinet housing and take out the evaporator pad.
Step 6
- Place the new evaporator pad inside the clean bottom cabinet.
- The sides should guide it into the correct position.
Place the new evaporator pad inside the clean bottom cabinet.
The sides should guide it into the correct position.
Step 7
- Replace the clips, nuts, and bolts removed in steps 2 through 4.
Replace the clips, nuts, and bolts removed in steps 2 through 4.
Step 8
- Turn on the humidifier.
Turn on the humidifier.
Enjoy your warm air! Your repair is complete!
Cancel: I did not complete this guide.
Author
with 1 other contributor
Zia Ahmed
Member since: 07/11/2021
190 Reputation
1 Guide authored
Badges:
2
Team
York University, Team F-30, Woodhouse Fall 2021
Member of York University, Team F-30, Woodhouse Fall 2021
YORK-WOODHOUSE-F21SFG30
1 Member
1 Guide authored
