Difficulty

Easy

Steps

5

Time Required

                          4 - 8 minutes

Sections

1

  • Furby “Feet” Cleaning Guide
  • 5 steps

Flags

0

  • BackHasbro Furby 2012

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Furby "Feet" Cleaning Guide
  • Flip Furby upside down so his feet are pointed towards you.
  • Unscrew the right and left screws on the base.

Flip Furby upside down so his feet are pointed towards you.

Unscrew the right and left screws on the base.

1024

Step 2

  • Remove the base from your Furby.
  • Flip over the base so the screws are on the right and left.
  • Unscrew the 2 right and 2 left inside screws.

Remove the base from your Furby.

Flip over the base so the screws are on the right and left.

Unscrew the 2 right and 2 left inside screws.

Step 3

  • Lift the housing for the foot components.
  • Rotate the base 90 degrees.
  • Locate all four of the foot activation levers. Remove them one by one from the base.

Lift the housing for the foot components.

Rotate the base 90 degrees.

Locate all four of the foot activation levers. Remove them one by one from the base.

Step 4

  • Locate the feet pieces and remove them.

Locate the feet pieces and remove them.

Step 5

  • Locate and gently lift out the four small springs using tweezers.
  • Now that you have all parts are removed, they can be cleaned and reassembled into Furby’s “feet”.

Locate and gently lift out the four small springs using tweezers.

Now that you have all parts are removed, they can be cleaned and reassembled into Furby’s “feet”.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Miles Drazkowski

Member since: 10/06/2016

398 Reputation

                                      1 Guide authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 15-5, Livingston Fall 2016                        

                                                  Member of Cal Poly, Team 15-5, Livingston Fall 2016 



                    CPSU-LIVINGSTON-F16S15G5                     


                                            4 Members                     


                                            6 Guides authored

jrrabrito - Jan 29, 2018

Reply

I greet my furby boom 2012 he falls asleep and when I wake him up he starts to cry and then he falls asleep. This started after a week without using.What I can do,Thanks for your help.Juan