Furbo Dog Camera Usb Power Jack Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          1 - 5 minutes            

Sections

2

• Back Cover
• 5 steps
• USB Power Jack
• 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

• BackFurbo Dog Camera

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Back Cover               

• Remove the lid from the top of your Furbo Dog Camera.

Remove the lid from the top of your Furbo Dog Camera.

1024

Step 2

• Rotate your Furbo so that the bottom faces you.
• Remove the rubber caps to reveal the four screws on the bottom of the Furbo.

Rotate your Furbo so that the bottom faces you.

Remove the rubber caps to reveal the four screws on the bottom of the Furbo.

Step 3

• Use a 2.5 mm Flathead screwdriver to remove the four 5 mm screws from the bottom of the Furbo.
• Use a 2.5 mm Flathead screwdriver to remove the single 5 mm screw under the silver sticker.

Use a 2.5 mm Flathead screwdriver to remove the four 5 mm screws from the bottom of the Furbo.

Use a 2.5 mm Flathead screwdriver to remove the single 5 mm screw under the silver sticker.

Step 4

• Rotate your Furbo so that the side is facing towards you.
• Use an opening tool to separate the two plastic coverings.

Rotate your Furbo so that the side is facing towards you.

Use an opening tool to separate the two plastic coverings.

Step 5

• Once you have separated the two plastic coverings, remove one side by pulling on it and carefully separating it from the adhesive.

Once you have separated the two plastic coverings, remove one side by pulling on it and carefully separating it from the adhesive.

Step 6

              USB Power Jack               

• Use a Phillips #000 screwdriver to remove the two 5 mm screws from the USB power jack.

Use a Phillips #000 screwdriver to remove the two 5 mm screws from the USB power jack.

Step 7

• Once you have removed the screws, gently pull the bundled cable connector free from the motherboard.

Once you have removed the screws, gently pull the bundled cable connector free from the motherboard.

Step 8

• The USB power jack PCB can now be removed from your Furbo and replaced.

The USB power jack PCB can now be removed from your Furbo and replaced.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 1 other contributor 

                    Piper Strgar                     

Member since: 03/21/2022

309 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       University of Alabama, Team 1-1, Bedsole Spring 2022                        

                                                  Member of University of Alabama, Team 1-1, Bedsole Spring 2022 



                    UA-BEDSOLE-S22S1G1                     


                                            3 Members                     


                                            6 Guides authored