Difficulty
Moderate
Steps
14
Time Required
Suggest a time??
Sections
1
- Fujitsu Siemens Expression Mobile v5515
- 14 steps
Flags
2
In Progress
This guide is a work in progress. Reload periodically to see the latest changes!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackFujitsu Siemens Esprimo Mobile v5515
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Remove the battery
- First, we unlock the battery so you can remove it by stretching it later.
First, we unlock the battery so you can remove it by stretching it later.
1024
Step 2
Remove the battery
Step 3
Remove the ram
- First we unscrew the cover, after the triplet and lastly, we retrieved the RAM to do it, we just have to move the “tabs” that are to the sides and the RAM will go alone
First we unscrew the cover, after the triplet and lastly, we retrieved the RAM to do it, we just have to move the “tabs” that are to the sides and the RAM will go alone
Step 4
Remove the WIFI card
- First we unscrew the card and then go alone, we will have to disconnect it only
First we unscrew the card and then go alone, we will have to disconnect it only
Step 5
Remove the fan.
- First, disconnect the power cord, and then unscrew the fan. Once we have taken it we can take advantage of it to open it to clean it up.
First, disconnect the power cord, and then unscrew the fan. Once we have taken it we can take advantage of it to open it to clean it up.
Step 6
Remove the heatsink
- First we unscrew the sinker, and then we take it away
First we unscrew the sinker, and then we take it away
Step 7
Remove the DVD player
- We just have to unscrew and then stretch to remove it
We just have to unscrew and then stretch to remove it
Step 8
Mount the DVD player
- To mount it we have to do the opposite that when disassembling, you put it on and then put the screw
To mount it we have to do the opposite that when disassembling, you put it on and then put the screw
Step 9
Mount the heatsink
- We put the sink back into place and we screw it
We put the sink back into place and we screw it
Step 10
Mount the fan
- Put the fan in place and screw it, we also have to connect the cable to the plate
Put the fan in place and screw it, we also have to connect the cable to the plate
Step 11
Mount the network card
- Now we place the network card in its place, download it and then screw it, finally we have to connect the cables in the corresponding order
Now we place the network card in its place, download it and then screw it, finally we have to connect the cables in the corresponding order
Step 12
Assemble the RAM
- Now we have to place RAM, we just have to put it in place diagonally and then download it.
Now we have to place RAM, we just have to put it in place diagonally and then download it.
Step 13
Mount the hard drive
- Now we will put the hard disk, first put it in its space and we move it to connect it, then screw it and close the lid.
Now we will put the hard disk, first put it in its space and we move it to connect it, then screw it and close the lid.
Step 14
Cover and put the battery
- We just have to put the lid, screw and put the battery in the battery, a wandering, we have to put the insurance.
We just have to put the lid, screw and put the battery in the battery, a wandering, we have to put the insurance.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
irlanda is helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
irlanda
Author
with 1 other contributor
Caleb
Member since: 05/08/2017
131 Reputation
1 Guide authored
Badges:
2