Difficulty

Moderate

Steps

3

Time Required

                          10 minutes            

Sections

1

  • Wireless LAN card
  • 3 steps

Flags

0

  • BackFujitsu LifeBook U810

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Wireless LAN card               
  • Remove back cover of the device by unscrewing the four 7mm screws with a Phillips #0 screwdriver.

Remove back cover of the device by unscrewing the four 7mm screws with a Phillips #0 screwdriver.

1024

Step 2

  • Remove the two 5mm screws with a Phillips #0 screwdriver.
  • Remove the wireless LAN card from the device.

Remove the two 5mm screws with a Phillips #0 screwdriver.

Remove the wireless LAN card from the device.

Step 3

  • Detach the two antenna cables connected to the wireless LAN card by gently pulling them out of place.

Detach the two antenna cables connected to the wireless LAN card by gently pulling them out of place.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors 

                    Anne Kutt                     

Member since: 10/22/2018

197 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       UC Davis, Team S4-G7, Lore Fall 2018                        

                                                  Member of UC Davis, Team S4-G7, Lore Fall 2018 



                    UCD-LORE-F18S4G7                     


                                            3 Members                     


                                            4 Guides authored