Fujitsu Lifebook S6120 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          35 minutes

Sections

Battery
1 step
Hinge Cover
4 steps
Keyboard
2 steps
PCI Adapter
3 steps
Screen
11 steps

Flags

BackFujitsu Lifebook S6120
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

To prevent injury, make sure the laptop is unplugged and turned off before removing the battery.
Push the two tabs in towards the laptop.
Lift the battery up and out from the frame of the laptop.

To prevent injury, make sure the laptop is unplugged and turned off before removing the battery.

Push the two tabs in towards the laptop.

Lift the battery up and out from the frame of the laptop.

1024

Step 2

              Hinge Cover

Use a plastic opening tool to lift the back of the hinge cover on the left and right sides of the computer.

Use a plastic opening tool to lift the back of the hinge cover on the left and right sides of the computer.

Step 3

Lift the hinge cover.
The hinge cover is connected to the motherboard by a ribbon cable. To prevent damage, lift hinge cover slowly.

Lift the hinge cover.

The hinge cover is connected to the motherboard by a ribbon cable. To prevent damage, lift hinge cover slowly.

Step 4

Use the tweezers to disconnect the ribbon cable from the motherboard.

Use the tweezers to disconnect the ribbon cable from the motherboard.

Step 5

With the tweezers detach hinge cover cables from the motherboard.
Remove hinge cover.

With the tweezers detach hinge cover cables from the motherboard.

Remove hinge cover.

Step 6

              Keyboard

Lift keyboard enough to show the ribbon cable.
The keyboard has a ribbon cable attached to the motherboard. Lift keyboard carefully to prevent damage.

Lift keyboard enough to show the ribbon cable.

The keyboard has a ribbon cable attached to the motherboard. Lift keyboard carefully to prevent damage.

Step 7

Use a plastic opening tool to release the ribbon cable from the motherboard.

Use a plastic opening tool to release the ribbon cable from the motherboard.

Step 8

              PCI Adapter

Push the secure clips outward.
The Adapter should pop up.

Push the secure clips outward.

The Adapter should pop up.

Step 9

Use tweezers to remove the wires from the Adapter.

Use tweezers to remove the wires from the Adapter.

Step 10

Take out the Adapter and carefully pull the wires out from the metal casing.

Take out the Adapter and carefully pull the wires out from the metal casing.

Step 11

              Screen

Remove the 4mm screws from the laptop with a Philips head #0
Remove the 4.5mm screws on the back of the laptop with a Philips #0

Remove the 4mm screws from the laptop with a Philips head #0

Remove the 4.5mm screws on the back of the laptop with a Philips #0

Step 12

Use a plastic opening tool to lift up both sides of the white tab.

Use a plastic opening tool to lift up both sides of the white tab.

Step 13

Use tweezers to grab onto the lever to remove the chip from the motherboard.

Use tweezers to grab onto the lever to remove the chip from the motherboard.

Step 14

Lift the screen up vertically

Lift the screen up vertically

Step 15

Remove rubber tabs with hands
Use a Philips head #0 to remove the 3mm screws

Remove rubber tabs with hands

Use a Philips head #0 to remove the 3mm screws

Step 16

Use the metal spudger to pry up the edge of the plastic casing up.
Remove the plastic frame from the screen.

Use the metal spudger to pry up the edge of the plastic casing up.

Remove the plastic frame from the screen.

Step 17

Remove the 3mm screws with a Philips head #00

Remove the 3mm screws with a Philips head #00

Step 18

Remove the 2.5mm screws with a Philips head #0 on both sides of the laptop

Remove the 2.5mm screws with a Philips head #0 on both sides of the laptop

Step 19

Lift the screen from the frame

Lift the screen from the frame

Step 20

Remove the ribbon from the back of the screen

Remove the ribbon from the back of the screen

Step 21

Use a pair of tweezers remove the white connector

Use a pair of tweezers remove the white connector

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Jessi Gallant

Member since: 03/19/2018

899 Reputation

                                      7 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       UMass Dartmouth, Team S5-G5, Peak Spring 2018                        

                                                  Member of UMass Dartmouth, Team S5-G5, Peak Spring 2018 



                    UMASSD-PEAK-S18S5G5                     


                                            3 Members                     


                                            18 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team