Difficulty
Very easy
Steps
4
Time Required
5 minutes
Sections
2
- Battery
- 1 step
- RAM
- 3 steps
Flags
0
BackFujitsu Lifebook S6120
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- To prevent injury, make sure the laptop is unplugged and turned off before removing the battery.
- Push the two tabs in towards the laptop.
- Lift the battery up and out from the frame of the laptop.
To prevent injury, make sure the laptop is unplugged and turned off before removing the battery.
Push the two tabs in towards the laptop.
Lift the battery up and out from the frame of the laptop.
1024
Step 2
RAM
- Use a Philips head #0 to remove the 4mm screws to the RAM cover.
Use a Philips head #0 to remove the 4mm screws to the RAM cover.
Step 3
- Use the plastic opening tool to lift the RAM cover.
- Use your hands to slide the cover off.
Use the plastic opening tool to lift the RAM cover.
Use your hands to slide the cover off.
Step 4
- Remove RAM module by pushing security clips outward.
- The RAM module should pop out.
- Carefully pull RAM module out of the computer.
Remove RAM module by pushing security clips outward.
The RAM module should pop out.
Carefully pull RAM module out of the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Jessi Gallant
Member since: 03/19/2018
899 Reputation
7 Guides authored
Badges:
8
+5 more badges
Team
UMass Dartmouth, Team S5-G5, Peak Spring 2018
Member of UMass Dartmouth, Team S5-G5, Peak Spring 2018
UMASSD-PEAK-S18S5G5
3 Members
18 Guides authored