Difficulty

Moderate

Steps

10

Time Required

                          20 minutes

Sections

4

  • Battery
  • 1 step
  • Hinge Cover
  • 4 steps
  • Keyboard
  • 2 steps
  • PCI Adapter
  • 3 steps

Flags

0

  • BackFujitsu Lifebook S6120

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • To prevent injury, make sure the laptop is unplugged and turned off before removing the battery.
  • Push the two tabs in towards the laptop.
  • Lift the battery up and out from the frame of the laptop.

To prevent injury, make sure the laptop is unplugged and turned off before removing the battery.

Push the two tabs in towards the laptop.

Lift the battery up and out from the frame of the laptop.

1024

Step 2

              Hinge Cover
  • Use a plastic opening tool to lift the back of the hinge cover on the left and right sides of the computer.

Use a plastic opening tool to lift the back of the hinge cover on the left and right sides of the computer.

Step 3

  • Lift the hinge cover.
  • The hinge cover is connected to the motherboard by a ribbon cable. To prevent damage, lift hinge cover slowly.

Lift the hinge cover.

The hinge cover is connected to the motherboard by a ribbon cable. To prevent damage, lift hinge cover slowly.

Step 4

  • Use the tweezers to disconnect the ribbon cable from the motherboard.

Use the tweezers to disconnect the ribbon cable from the motherboard.

Step 5

  • With the tweezers detach hinge cover cables from the motherboard.
  • Remove hinge cover.

With the tweezers detach hinge cover cables from the motherboard.

Remove hinge cover.

Step 6

              Keyboard
  • Lift keyboard enough to show the ribbon cable.
  • The keyboard has a ribbon cable attached to the motherboard. Lift keyboard carefully to prevent damage.

Lift keyboard enough to show the ribbon cable.

The keyboard has a ribbon cable attached to the motherboard. Lift keyboard carefully to prevent damage.

Step 7

  • Use a plastic opening tool to release the ribbon cable from the motherboard.

Use a plastic opening tool to release the ribbon cable from the motherboard.

Step 8

              PCI Adapter
  • Push the secure clips outward.
  • The Adapter should pop up.

Push the secure clips outward.

The Adapter should pop up.

Step 9

  • Use tweezers to remove the wires from the Adapter.

Use tweezers to remove the wires from the Adapter.

Step 10

  • Take out the Adapter and carefully pull the wires out from the metal casing.

Take out the Adapter and carefully pull the wires out from the metal casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    Jaimie Nakamura

Member since: 03/20/2018

229 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       UMass Dartmouth, Team S5-G5, Peak Spring 2018                        

                                                  Member of UMass Dartmouth, Team S5-G5, Peak Spring 2018 



                    UMASSD-PEAK-S18S5G5                     


                                            3 Members                     


                                            18 Guides authored