Difficulty
Easy
Steps
7
Time Required
5 minutes
Sections
2
- Battery
- 2 steps
- RAM
- 5 steps
Flags
0
BackFujitsu LifeBook N3510
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Locate the two clips on the bottom of the computer that support the battery.
Locate the two clips on the bottom of the computer that support the battery.
1024
Step 2
- Using your fingers, push the clips inward and then upward.
- Lift the battery out of the computer.
Using your fingers, push the clips inward and then upward.
Lift the battery out of the computer.
Step 3
RAM
- Locate the RAM cover.
Locate the RAM cover.
Step 4
- Remove the screw labeled “3.”
- The screw is not shown in the picture.
Remove the screw labeled “3.”
The screw is not shown in the picture.
Step 5
- Remove the RAM cover by lifting it with your finger.
Remove the RAM cover by lifting it with your finger.
Step 6
- Remove the RAM module by pushing the securing clips outward.
- The RAM module will then slightly pop out.
- When you are installing a new RAM module, carefully insert it into the socket and push downwards.
Remove the RAM module by pushing the securing clips outward.
The RAM module will then slightly pop out.
When you are installing a new RAM module, carefully insert it into the socket and push downwards.
Step 7
- Carefully pull the RAM module from the computer.
Carefully pull the RAM module from the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 7 other contributors
Neil Daniels
Member since: 01/17/2011
1,411 Reputation
11 Guides authored
Badges:
12
+9 more badges
Team
Cal Poly, Team 5-18, Amido Winter 2011
Member of Cal Poly, Team 5-18, Amido Winter 2011
CPSU-AMIDO-W11S5G18
3 Members
22 Guides authored
