Difficulty

Moderate

Steps

10

Time Required

                          5 - 10 minutes

Sections

3

  • Battery
  • 2 steps
  • Hinge Cover
  • 5 steps
  • Keyboard
  • 3 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackFujitsu LifeBook N3510

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Battery
  • Locate the two clips on the bottom of the computer that support the battery.

Locate the two clips on the bottom of the computer that support the battery.

1024

Step 2

  • Using your fingers, push the clips inward and then upward.
  • Lift the battery out of the computer.

Using your fingers, push the clips inward and then upward.

Lift the battery out of the computer.

Step 3

              Hinge Cover
  • Use a spudger to lift the back of the hinge cover on the left and right sides of the computer.

Use a spudger to lift the back of the hinge cover on the left and right sides of the computer.

Step 4

  • Lay the computer flat on a stable surface with the monitor pointing away from you.

Lay the computer flat on a stable surface with the monitor pointing away from you.

Step 5

  • Use a spudger to partially lift the hinge cover.

Use a spudger to partially lift the hinge cover.

Step 6

  • The hinge cover has a ribbon cable that is attached to the motherboard. To prevent damage, lift the hinge cover slowly.
  • Lift the hinge cover enough to expose the ribbon cable.

The hinge cover has a ribbon cable that is attached to the motherboard. To prevent damage, lift the hinge cover slowly.

Lift the hinge cover enough to expose the ribbon cable.

Step 7

  • Disconnect the ribbon cable from the motherboard and remove the hinge cover from the computer.

Disconnect the ribbon cable from the motherboard and remove the hinge cover from the computer.

Step 8

              Keyboard
  • The keyboard has a ribbon cable that is attached to the motherboard. To prevent damage, lift keyboard slowly.
  • Lift the keyboard enough to expose the ribbon cable.

The keyboard has a ribbon cable that is attached to the motherboard. To prevent damage, lift keyboard slowly.

Lift the keyboard enough to expose the ribbon cable.

Step 9

  • Use a spudger to release the ribbon cable from the motherboard.

Use a spudger to release the ribbon cable from the motherboard.

Step 10

  • After the ribbon has been detached, carefully remove the keyboard.

After the ribbon has been detached, carefully remove the keyboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 8 other contributors 


                    Neil Daniels

Member since: 01/17/2011

1,411 Reputation

                                      11 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 5-18, Amido Winter 2011                        

                                                  Member of Cal Poly, Team 5-18, Amido Winter 2011 



                    CPSU-AMIDO-W11S5G18                     


                                            3 Members                     


                                            22 Guides authored