Fujifilm X T10 Top Assembly Removal Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          30 minutes - 2 hours            

Sections

1

• Fujifilm X-T10 top assembly removal
• 9 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackFujifilm X-T10

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

We highly suggest you use a magnetic project mat or an organization tray. This camera has many different types of screws and keeping them organized is key to proper reassembly.

What you need

Step 1

              Remove Lens, Battery, SD card               

• Remove the lens.
• Turn the camera upside down to locate the battery compartment.
• Slide the button up to open the compartment.
• Slide the orange button up to release the battery.
• Push to remove SD card
• The lens, battery and SD card is not shown in these photos.

Remove the lens.

Turn the camera upside down to locate the battery compartment.

Slide the button up to open the compartment.

Slide the orange button up to release the battery.

Push to remove SD card

The lens, battery and SD card is not shown in these photos.

1024

Step 2

              Remove side screws               

• Remove x2 4.3 mm length Phillips screws from both sides of the camera.

Remove x2 4.3 mm length Phillips screws from both sides of the camera.

Step 3

              Bottom screws               

• Remove the 3x 3.7 mm length Phillips screws from the bottom of the camera.

Remove the 3x 3.7 mm length Phillips screws from the bottom of the camera.

Step 4

              Screws behind the LCD               

• Remove 2x 3.7 mm length Phillips screws.
• Remove the 3.1 mm length Phillips screw.
• Remove 2x 3.2 mm length Phillips screws.
• When reassembling take a note of the screw lengths.

Remove 2x 3.7 mm length Phillips screws.

Remove the 3.1 mm length Phillips screw.

Remove 2x 3.2 mm length Phillips screws.

When reassembling take a note of the screw lengths.

Step 5

              Remove the bottom cover               

• Slowly pry and slide the bottom cover down.

Slowly pry and slide the bottom cover down.

Step 6

              Remove the back assembly with LCD               

• Work slowly on this step. There is a chance of ripping a ribbon cable.
• Start prying and lifting the back LCD assembly
• To remove the ribbon cable, flip up the WHITE lock on the large ZIF connector with the flat end of a spudger.

Work slowly on this step. There is a chance of ripping a ribbon cable.

Start prying and lifting the back LCD assembly

To remove the ribbon cable, flip up the WHITE lock on the large ZIF connector with the flat end of a spudger.

Step 7

              Disconnect ribbon cables               

• To remove the ribbon cable, flip up the BLACK lock on the connectors with the flat end of a spudger.
• Carefully pull out the ribbon cables.

To remove the ribbon cable, flip up the BLACK lock on the connectors with the flat end of a spudger.

Carefully pull out the ribbon cables.

Step 8

              Unscrew the top assembly               

• Remove x2 2.1 mm length Phillips screws.
• Screw on the right is behind the ribbon cable and some tape.
• Remove 6 mm length Phillips screw from deeper in the case.

Remove x2 2.1 mm length Phillips screws.

Screw on the right is behind the ribbon cable and some tape.

Remove 6 mm length Phillips screw from deeper in the case.

Step 9

              Remove the top assembly               

• Slowly pry and lift the top assembly away from the body.
• DONE!
• To reassemble, follow the steps backwards.

Slowly pry and lift the top assembly away from the body.

DONE!

To reassemble, follow the steps backwards.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Rimvydas                     

Member since: 03/29/2012

680 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges