Difficulty
Moderate
Steps
3
Time Required
Suggest a time??
Sections
2
- Battery
- 1 step
- Lens Assembly
- 2 steps
Flags
0
BackFujifilm X-M1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
We highly suggest you use a magnetic project mat or an organization tray. This camera has many different types of screws and keeping them organized is key to proper reassembly.
What you need
Step 1
Battery
- Turn the camera upside down to locate the battery compartment.
- Slide the button up to open the compartment.
- Slide the orange button up to release the battery.
- The battery is not shown in these photos.
Turn the camera upside down to locate the battery compartment.
Slide the button up to open the compartment.
Slide the orange button up to release the battery.
The battery is not shown in these photos.
1024
Step 2
Lens Assembly
- Twist the lens cap to remove it from the camera.
- Remove the six 6.5 mm Phillips screws from the front of the lens assembly.
- Use tweezers to remove the top metal ring and the thin metal ring below it .
Twist the lens cap to remove it from the camera.
Remove the six 6.5 mm Phillips screws from the front of the lens assembly.
Use tweezers to remove the top metal ring and the thin metal ring below it .
Step 3
- Remove the four 4.3 mm Phillips screws inside the lens assembly.
Remove the four 4.3 mm Phillips screws inside the lens assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
Kelsea Weber
Member since: 11/12/2015
18,948 Reputation
32 Guides authored
Badges:
47
+44 more badges
Team
iFixit
Member of iFixit
Community
141 Members
15,767 Guides authored
