Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Lens cover/case
- 3 steps
Flags
2
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackFujifilm FinePix Z90
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Lens cover/case
- Use a small #000 Phillips screwdriver to take the screws out. Keep all the screws in a container and the two different types separate.
- Remove the two screws on the right side.On the same side there is USB connector, open that little door and unscrew the little screw inside of it.
Use a small #000 Phillips screwdriver to take the screws out. Keep all the screws in a container and the two different types separate.
Remove the two screws on the right side.On the same side there is USB connector, open that little door and unscrew the little screw inside of it.
1024
Step 2
- Take the two screws on the left side and the two screws on the bottom of the camera.
Take the two screws on the left side and the two screws on the bottom of the camera.
Step 3
- By now you will have the front case and the back case separated from each other.
By now you will have the front case and the back case separated from each other.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Sam Clark
Member since: 11/03/2015
301 Reputation
3 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team 1-6, Bhusal Fall 2015
Member of UMass Dartmouth, Team 1-6, Bhusal Fall 2015
UMASSD-BHUSAL-F15S1G6
2 Members
6 Guides authored
