Fujifilm Finepix Z1 Lens Barrier Replacement Repair Guide

Difficulty

Difficult

Steps

5

Time Required

                          55 minutes - 1 hour            

Sections

1

• Lens Barrier
• 5 steps

Flags

2

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

Step Trimmer

This guide has unnecessary steps. Trim them to be more concise!

• BackFujifilm FinePix Z1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Lens Barrier               

• Find the front face of the camera and test to see of the Lens Barrier will slide.
• Make sure items are not trapped or stuck between the Lens Barrier and the camera lens.
• Check to see if the camera power turns on by sliding the barrier. If not check to see if the lens barrier is on the correct track.

Find the front face of the camera and test to see of the Lens Barrier will slide.

Make sure items are not trapped or stuck between the Lens Barrier and the camera lens.

Check to see if the camera power turns on by sliding the barrier. If not check to see if the lens barrier is on the correct track.

1024

Step 2

• Open the camera by removing the 5x4.0 mm external screws with the 1.0 flathead.

Open the camera by removing the 5x4.0 mm external screws with the 1.0 flathead.

Step 3

• Gently pull the top and bottom apart.
• Make sure the circular spring on the back of the door is intact by manoeuvring the lens barrier and finding the sticking point.

Gently pull the top and bottom apart.

Make sure the circular spring on the back of the door is intact by manoeuvring the lens barrier and finding the sticking point.

Step 4

• Find the thin, flat orange cable connector that operates the lens barrier and connects it to the main circuit board.
• Check to make sure the cable is not stuck or broken.

Find the thin, flat orange cable connector that operates the lens barrier and connects it to the main circuit board.

Check to make sure the cable is not stuck or broken.

Step 5

• Replace lens cable connector if it is damaged.
• This last step will require you to solder some of the cable connectors. Click here to learn how to complete this step.

Replace lens cable connector if it is damaged.

This last step will require you to solder some of the cable connectors. Click here to learn how to complete this step.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Carra                     

Member since: 01/30/2018

533 Reputation

                                      4 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge                           

Team

                       Baylor, Team S2-G4, Johnson Spring 2018                        

                                                  Member of Baylor, Team S2-G4, Johnson Spring 2018 



                    BU-JOHNSON-S18S2G4                     


                                            3 Members                     


                                            8 Guides authored