Difficulty
Easy
Steps
5
Time Required
1 - 3 minutes
Sections
1
- Battery
- 5 steps
Flags
0
BackFujifilm FinePix Z1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Step 1
Battery
- Make sure the battery on the display screen of the camera is charged. If it is not fully charged, plug into charger and turn the camera on.
- If the battery image on the display screen does not show then you will need to check the battery.
Make sure the battery on the display screen of the camera is charged. If it is not fully charged, plug into charger and turn the camera on.
If the battery image on the display screen does not show then you will need to check the battery.
1024
Step 2
- Turn the camera to the bottom and find the battery access door on the left side.
Turn the camera to the bottom and find the battery access door on the left side.
Step 3
- Open the battery access door by pushing down and up on the spring-hinged door.
- Check that there is no obvious damage or reason for a faulty battery.
Open the battery access door by pushing down and up on the spring-hinged door.
Check that there is no obvious damage or reason for a faulty battery.
Step 4
- Push the yellow tab to eject the battery.
Push the yellow tab to eject the battery.
Step 5
- Remove the battery and replace with a new one.
Remove the battery and replace with a new one.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Carra
Member since: 01/30/2018
533 Reputation
4 Guides authored
Badges:
4
+1 more badge
Team
Baylor, Team S2-G4, Johnson Spring 2018
Member of Baylor, Team S2-G4, Johnson Spring 2018
BU-JOHNSON-S18S2G4
3 Members
8 Guides authored