Difficulty

Easy

Steps

10

Time Required

                          5 minutes

Sections

2

  • Battery
  • 3 steps
  • Front and Back Panel
  • 7 steps

Flags

0

  • BackFujifilm FinePix XP70

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Power off the camera.
  • Leaving the camera on while removing presents the risk of electrical shock or permanent data loss.

Power off the camera.

Leaving the camera on while removing presents the risk of electrical shock or permanent data loss.

1024

Step 2

  • Push down on the center button and turn the dial on the side counterclockwise to open the battery compartment.

Push down on the center button and turn the dial on the side counterclockwise to open the battery compartment.

Step 3

  • Pull the orange tab towards the hinge to release the battery.

Pull the orange tab towards the hinge to release the battery.

Step 4

              Front and Back Panel
  • Remove one Phillips screw with a Phillips head 0 screwdriver
  • Remove one hex head screw with a hex 1.3 screwdriver bit.

Remove one Phillips screw with a Phillips head 0 screwdriver

Remove one hex head screw with a hex 1.3 screwdriver bit.

Step 5

  • Unscrew two 4.0mm long hex head screws with a hex 1.3 screwdriver bit.

Unscrew two 4.0mm long hex head screws with a hex 1.3 screwdriver bit.

Step 6

  • Unscrew five 4.0mm screws with a Phillips head 0 screwdriver

Unscrew five 4.0mm screws with a Phillips head 0 screwdriver

Step 7

  • Pry the black bottom plate off using a plastic opening tool.
  • It is easier to start on the side of the open battery compartment.

Pry the black bottom plate off using a plastic opening tool.

It is easier to start on the side of the open battery compartment.

Step 8

  • Pry the front plate off using a plastic opening tool.
  • It’s recommended to start at the ridge on the top or bottom side.

Pry the front plate off using a plastic opening tool.

It’s recommended to start at the ridge on the top or bottom side.

Step 9

  • Lift off the front plate.

Lift off the front plate.

Step 10

  • Pry the back plate off with a plastic opening tool

Pry the back plate off with a plastic opening tool

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Olivia A

Member since: 10/24/2016

478 Reputation

                                      4 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges

Team

                       UMass Dartmouth, Team S7-G3, Julie Spring 2017                        

                                                  Member of UMass Dartmouth, Team S7-G3, Julie Spring 2017 



                    UMASSD-JULIE-S17S7G3                     


                                            4 Members                     


                                            12 Guides authored

Jose Gerardo Hernandez Montiel - Mar 22, 2018

Reply

Very helpful, do you know if you can buy these parts? I need the back part of the camera.

thank you

jg