Fujifilm Finepix Xp50 Rear Case Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 20 minutes

Sections

Rear Case
6 steps

Flags

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

BackFujifilm FinePix XP50
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Rear Case

Using 1.5mm Hex Screwdriver, remove two 3.0 mm hex screws on the front of the camera.
Using Phillips #00 screwdriver, remove two 3.0 mm screws on the bottom of the front face.

Using 1.5mm Hex Screwdriver, remove two 3.0 mm hex screws on the front of the camera.

Using Phillips #00 screwdriver, remove two 3.0 mm screws on the bottom of the front face.

1024

Step 2

Using Phillips #00 screwdriver, remove 3.0 mm screws on the bottom of the camera closer to the back.
Using Phillips #00 screwdriver remove two 3.0 mm screws on the back of the camera. This will remove the eyelet for the camera strap and the rear cover.

Using Phillips #00 screwdriver, remove 3.0 mm screws on the bottom of the camera closer to the back.

Using Phillips #00 screwdriver remove two 3.0 mm screws on the back of the camera. This will remove the eyelet for the camera strap and the rear cover.

Step 3

Using Phillips #00 screwdriver, remove the two 3.0 mm screws.

Using Phillips #00 screwdriver, remove the two 3.0 mm screws.

Step 4

Using 1.5mm Hex screwdriver, remove 3.0 mm hex screw on top edge of silver panel.
Using Phillips #00 screwdriver, remove 3.0 mm screw on bottom edge.
Once both screws are removed the silver side casing will slide off.

Using 1.5mm Hex screwdriver, remove 3.0 mm hex screw on top edge of silver panel.

Using Phillips #00 screwdriver, remove 3.0 mm screw on bottom edge.

Once both screws are removed the silver side casing will slide off.

Step 5

Unlatch the four clasps located on each side of the camera by hand.
The fourth clasp is concealed by the battery door. To reach the clasp see Fujifilm FinePix XP50 Battery Replacement for instructions.

Unlatch the four clasps located on each side of the camera by hand.

The fourth clasp is concealed by the battery door. To reach the clasp see Fujifilm FinePix XP50 Battery Replacement for instructions.

Step 6

Using Phillips #00 screwdriver, remove seven 3.0 mm screws.
Remove the remaining five 3.0 mm screws which hold the rear case and the control panel together.
The rear panel is now free from the camera.

Using Phillips #00 screwdriver, remove seven 3.0 mm screws.

Remove the remaining five 3.0 mm screws which hold the rear case and the control panel together.

The rear panel is now free from the camera.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 6 other contributors

                    Paulo Abalos

Member since: 03/20/2015

122 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Baylor, Team 2-4, Grigsby Spring 2015                        

                                                  Member of Baylor, Team 2-4, Grigsby Spring 2015 



                    BU-GRIGSBY-S15S2G4                     


                                            4 Members                     


                                            8 Guides authored

CO - Nov 29, 2015

where can I buy the Fujifilm FinePix XP50 Rear Case?

Action Shots#

Introduction#

What you need#

Team#

Action Shots

Introduction

What you need

Team