Difficulty
Difficult
Steps
10
Time Required
30 minutes
Sections
3
- Lens
- 3 steps
- Front Cover
- 4 steps
- LCD
- 3 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
Inconsistent Images
Updating the images on this guide to be more consistent with the prerequisites would increase its awesomeness.
Better Introduction
Improve this guide by completing or revising its introduction.
BackFujifilm FinePix XP10SE
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Lens
- Remove the screws from the lens cover
Remove the screws from the lens cover
1024
Step 2
- Remove the screws from the side metal cover of outer case.
Remove the screws from the side metal cover of outer case.
Step 3
- Gently remove the Lens from the housing.
Gently remove the Lens from the housing.
Step 4
Front Cover
- Use a screwdriver to remove the four screws from the top and bottom of the camera. Remove the screws securing the lanyard as well.
- Use a T5 Torx bit to secure the exterior decorative cover of the device.
Use a screwdriver to remove the four screws from the top and bottom of the camera. Remove the screws securing the lanyard as well.
Use a T5 Torx bit to secure the exterior decorative cover of the device.
Step 5
- Use a plastic opening tool to detach the case.
Use a plastic opening tool to detach the case.
Step 6
- Use the plastic opening tool to cautiously pry the casing off of the camera.
Use the plastic opening tool to cautiously pry the casing off of the camera.
Step 7
- Carefully slide the case to the left. Avoid cracking the case on the lens.
Carefully slide the case to the left. Avoid cracking the case on the lens.
Step 8
LCD
- Locate the securing tabs of the housing unit.
- Using the spongerslowly work your way around the outside of the case using the sponging tool to pry open the case.
- *** Take extreme caution when doing this being careful not to break the securing tabs of the housing.
Locate the securing tabs of the housing unit.
Using the spongerslowly work your way around the outside of the case using the sponging tool to pry open the case.
*** Take extreme caution when doing this being careful not to break the securing tabs of the housing.
Step 9
- Once the case is open locate the Ribbon cable attachment for the LCD screen.
- Carefully ensure that the LCD screen is free from all attachments and any tape securing the ribbon cable is released.
Once the case is open locate the Ribbon cable attachment for the LCD screen.
Carefully ensure that the LCD screen is free from all attachments and any tape securing the ribbon cable is released.
Step 10
- Gently lift up on the black securing bar of the ribbon cable in order to free it from the units motherboard, thus releasing the LCD from the computer.
Gently lift up on the black securing bar of the ribbon cable in order to free it from the units motherboard, thus releasing the LCD from the computer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Bryan
Member since: 01/25/2015
598 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Pasco Hernando, Team 5-1, Prince Winter 2015
Member of Pasco Hernando, Team 5-1, Prince Winter 2015
PHSC-PRINCE-W15S5G1
5 Members
10 Guides authored
