Difficulty
Moderate
Steps
4
Time Required
15 minutes
Sections
1
- Front Cover
- 4 steps
Flags
Needs Better Images
Better photos will improve this guide. Help out by taking, editing, or uploading new ones!
BackFujifilm FinePix XP10SE
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Cover
- Use a screwdriver to remove the four screws from the top and bottom of the camera. Remove the screws securing the lanyard as well.
- Use a T5 Torx bit to secure the exterior decorative cover of the device.
Use a screwdriver to remove the four screws from the top and bottom of the camera. Remove the screws securing the lanyard as well.
Use a T5 Torx bit to secure the exterior decorative cover of the device.
1024
Step 2
- Use a plastic opening tool to detach the case.
Use a plastic opening tool to detach the case.
Step 3
- Use the plastic opening tool to cautiously pry the casing off of the camera.
Use the plastic opening tool to cautiously pry the casing off of the camera.
Step 4
- Carefully slide the case to the left. Avoid cracking the case on the lens.
Carefully slide the case to the left. Avoid cracking the case on the lens.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 8 other contributors
Bryan
Member since: 01/25/2015
598 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
Pasco Hernando, Team 5-1, Prince Winter 2015
Member of Pasco Hernando, Team 5-1, Prince Winter 2015
PHSC-PRINCE-W15S5G1
5 Members
10 Guides authored