Difficulty
Difficult
Steps
10
Time Required
1 hour
Sections
3
- Battery Door
- 7 steps
- LCD Screen
- 1 step
- Flashbulb
- 2 steps
Flags
1
Better Introduction
Improve this guide by completing or revising its introduction.
BackFujifilm FinePix S8630
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery Door
- Remove the M3 x 4mm screws from the bottom of your device as indicated by the picture. using the Philips Head J0 Screw Driver Bit .
Remove the M3 x 4mm screws from the bottom of your device as indicated by the picture. using the Philips Head J0 Screw Driver Bit .
1024
Step 2
- Use your Philips Head Screwdriver to remove the M3 x 4mm screws from the left side of the device as indicated by the pictures.
Use your Philips Head Screwdriver to remove the M3 x 4mm screws from the left side of the device as indicated by the pictures.
Step 3
- Use your Philips Head Screwdriver to remove the M3 x 4mm screws from the right side of the device as indicated by the pictures.
Use your Philips Head Screwdriver to remove the M3 x 4mm screws from the right side of the device as indicated by the pictures.
Step 4
- Use your Philips Head Screwdriver to remove the M3 x 4mm screws from the camera flash lid as indicated by the picture.
- Remove the plastic cover from the flash lid by gentle pulling them apart or using the plastic opening tool.
Use your Philips Head Screwdriver to remove the M3 x 4mm screws from the camera flash lid as indicated by the picture.
Remove the plastic cover from the flash lid by gentle pulling them apart or using the plastic opening tool.
Step 5
- Fold the lid down in order to access and remove the final M3 x 4mm screw using your Philips Head Screwdriver.
Fold the lid down in order to access and remove the final M3 x 4mm screw using your Philips Head Screwdriver.
Step 6
- Use the plastic opening tool to pry the back and front casings of the camera apart.
- Once pried apart use your hands to pull off the back plate of the camera.
- You will need to apply a little bit of force to remove the back plate.
Use the plastic opening tool to pry the back and front casings of the camera apart.
Once pried apart use your hands to pull off the back plate of the camera.
You will need to apply a little bit of force to remove the back plate.
Step 7
- Once the back plate is removed twist the battery cover clockwise and it should easily dislodge.
Once the back plate is removed twist the battery cover clockwise and it should easily dislodge.
Step 8
LCD Screen
- Gently pull the tab out of the motherboard and then the LCD screen should easily be removed.
Gently pull the tab out of the motherboard and then the LCD screen should easily be removed.
Step 9
Flashbulb
- Unsolder the connections shown in the image that connect the black, pink, and blue wires to the bulb.
- Soldering Guide: How To Solder and Desolder Connections
Unsolder the connections shown in the image that connect the black, pink, and blue wires to the bulb.
Soldering Guide: How To Solder and Desolder Connections
Step 10
- Using the tweezers remove the flashbulb.
Using the tweezers remove the flashbulb.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 5 other contributors
Colton Lancsarics
Member since: 02/10/2016
731 Reputation
6 Guides authored
Badges:
13
+10 more badges
Team
USF Tampa, Team 3-2, Sullivan Spring 2016
Member of USF Tampa, Team 3-2, Sullivan Spring 2016
USFT-SULLIVAN-S16S3G2
4 Members
12 Guides authored
Flipping Turtle - Nov 16, 2020
Reply
How do you discharge the capacitor on this model?
