Difficulty
Easy
Steps
10
Time Required
5 - 10 minutes
Sections
4
- Battery
- 3 steps
- Back Cover
- 3 steps
- Battery Compartment
- 1 step
- Battery Lead Terminals
- 3 steps
Flags
0
BackFujiFilm FinePix S5100
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Ensure your camera is in the off position.
- Orient the camera upside down with the lens facing to the left and the battery compartment facing directly toward you.
Ensure your camera is in the off position.
Orient the camera upside down with the lens facing to the left and the battery compartment facing directly toward you.
1024
Step 2
- Open the battery door by pushing down and in the direction of the arrow on the door.
Open the battery door by pushing down and in the direction of the arrow on the door.
Step 3
- Remove four AA batteries from the camera.
Remove four AA batteries from the camera.
Step 4
Back Cover
- Turn the camera so the screen is facing you and the camera lens is facing away from you.
Turn the camera so the screen is facing you and the camera lens is facing away from you.
Step 5
- Remove two 0.9mm Phillips #000 screws from the right side of the camera.
- Remove one 0.6mm Phillips #000 screw from the left side of the camera.
- Remove two 0.6mm Phillips #000 screws from the bottom side of the camera.
- When replacing the back cover on the camera, there will be an audible click which ensures the cover has completely seated with the rest of the camera.
Remove two 0.9mm Phillips #000 screws from the right side of the camera.
Remove one 0.6mm Phillips #000 screw from the left side of the camera.
Remove two 0.6mm Phillips #000 screws from the bottom side of the camera.
When replacing the back cover on the camera, there will be an audible click which ensures the cover has completely seated with the rest of the camera.
Step 6
- Carefully pull the back cover and separate it from the rest of the camera body.
- Carefully flip up the top of the tan colored tab to disconnect the ribbon cable and completely remove the back cover.
Carefully pull the back cover and separate it from the rest of the camera body.
Carefully flip up the top of the tan colored tab to disconnect the ribbon cable and completely remove the back cover.
Step 7
Battery Compartment
- Remove the single 1.3mm Phillips #000 screw.
- Carefully remove the battery compartment from the rest of the camera.
Remove the single 1.3mm Phillips #000 screw.
Carefully remove the battery compartment from the rest of the camera.
Step 8
Battery Lead Terminals
- Remove two 0.6mm Phillips #000 screws from the metal battery terminal lead.
Remove two 0.6mm Phillips #000 screws from the metal battery terminal lead.
Step 9
- Using a pair of tweezers, remove the two back panel pieces from the battery terminal leads found inside of the battery compartment door.
Using a pair of tweezers, remove the two back panel pieces from the battery terminal leads found inside of the battery compartment door.
Step 10
- Using the a pair of tweezers, remove one (+)positive and one (-)negative battery terminal leads from the battery compartment.
Using the a pair of tweezers, remove one (+)positive and one (-)negative battery terminal leads from the battery compartment.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 2 other contributors
Evans
Member since: 09/16/2019
586 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
Embry-Riddle Aeronautical University, Team S6-G1, Salas Fall 2019
Member of Embry-Riddle Aeronautical University, Team S6-G1, Salas Fall 2019
ERAU-SALAS-F19S6G1
4 Members
8 Guides authored
