Difficulty

Easy

Steps

8

Time Required

                          5 - 10 minutes

Sections

4

  • Battery
  • 3 steps
  • Back Cover
  • 3 steps
  • Battery Compartment
  • 1 step
  • Battery Door
  • 1 step

Flags

0

  • BackFujiFilm FinePix S5100

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Battery
  • Ensure your camera is in the off position.
  • Orient the camera upside down with the lens facing to the left and the battery compartment facing directly toward you.

Ensure your camera is in the off position.

Orient the camera upside down with the lens facing to the left and the battery compartment facing directly toward you.

1024

Step 2

  • Open the battery door by pushing down and in the direction of the arrow on the door.

Open the battery door by pushing down and in the direction of the arrow on the door.

Step 3

  • Remove four AA batteries from the camera.

Remove four AA batteries from the camera.

Step 4

              Back Cover
  • Turn the camera so the screen is facing you and the camera lens is facing away from you.

Turn the camera so the screen is facing you and the camera lens is facing away from you.

Step 5

  • Remove two 0.9mm Phillips #000 screws from the right side of the camera.
  • Remove one 0.6mm Phillips #000 screw from the left side of the camera.
  • Remove two 0.6mm Phillips #000 screws from the bottom side of the camera.
  • When replacing the back cover on the camera, there will be an audible click which ensures the cover has completely seated with the rest of the camera.

Remove two 0.9mm Phillips #000 screws from the right side of the camera.

Remove one 0.6mm Phillips #000 screw from the left side of the camera.

Remove two 0.6mm Phillips #000 screws from the bottom side of the camera.

When replacing the back cover on the camera, there will be an audible click which ensures the cover has completely seated with the rest of the camera.

Step 6

  • Carefully pull the back cover and separate it from the rest of the camera body.
  • Carefully flip up the top of the tan colored tab to disconnect the ribbon cable and completely remove the back cover.

Carefully pull the back cover and separate it from the rest of the camera body.

Carefully flip up the top of the tan colored tab to disconnect the ribbon cable and completely remove the back cover.

Step 7

              Battery Compartment
  • Remove the single 1.3mm Phillips #000 screw.
  • Carefully remove the battery compartment from the rest of the camera.

Remove the single 1.3mm Phillips #000 screw.

Carefully remove the battery compartment from the rest of the camera.

Step 8

              Battery Door
  • Use a pair of tweezers to carefully pull the 4.4mm rod out of the battery compartment.
  • Once the rod is out, the door can easily be removed.

Use a pair of tweezers to carefully pull the 4.4mm rod out of the battery compartment.

Once the rod is out, the door can easily be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Christopher Coviello

Member since: 09/14/2019

185 Reputation

                                      1 Guide authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Embry-Riddle Aeronautical University, Team S6-G1, Salas Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S6-G1, Salas Fall 2019 



                    ERAU-SALAS-F19S6G1                     


                                            4 Members                     


                                            8 Guides authored