Difficulty

Moderate

Steps

13

Time Required

                          10 - 15 minutes

Sections

2

  • LCD
  • 8 steps
  • Viewfinder
  • 5 steps

Flags

0

  • BackFujiFilm FinePix S4500

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD
  • Remove the two 3.5 mm Phillips #1 screws in these positions on the left side of the camera with a screwdriver.

Remove the two 3.5 mm Phillips #1 screws in these positions on the left side of the camera with a screwdriver.

1024

Step 2

  • Remove the three 3.5 mm Phillips #1 screws in these locations on the bottom of the camera with a screwdriver.

Remove the three 3.5 mm Phillips #1 screws in these locations on the bottom of the camera with a screwdriver.

Step 3

  • Remove the four 3.5 mm Phillips #1 screws in these positions on the right side of the camera with a screwdriver.

Remove the four 3.5 mm Phillips #1 screws in these positions on the right side of the camera with a screwdriver.

Step 4

  • Use a plastic opening tool to separate the back panel from the camera on the left side.

Use a plastic opening tool to separate the back panel from the camera on the left side.

Step 5

  • Use a plastic opening tool to separate the back panel from the camera on the bottom.

Use a plastic opening tool to separate the back panel from the camera on the bottom.

Step 6

  • Use a plastic opening tool to separate the back panel from the camera on the left side, then remove the back panel from the camera.

Use a plastic opening tool to separate the back panel from the camera on the left side, then remove the back panel from the camera.

Step 7

  • Use a plastic opening tool to separate the LCD screen from the camera.

Use a plastic opening tool to separate the LCD screen from the camera.

Step 8

  • Flip up the black tab holding the LCD ribbon wire in place and remove wire.

Flip up the black tab holding the LCD ribbon wire in place and remove wire.

Step 9

              Viewfinder
  • Remove the highlighted 2.7 mm Phillips #1 screws to release the metal cover.

Remove the highlighted 2.7 mm Phillips #1 screws to release the metal cover.

Step 10

  • Turn the camera on its side and remove the highlighted 2.7 mm Phillips #1 screws.

Turn the camera on its side and remove the highlighted 2.7 mm Phillips #1 screws.

Step 11

  • Lift and remove viewfinder cover

Lift and remove viewfinder cover

Step 12

  • Use the plastic opening tool to remove the ribbon wire from inside the camera

Use the plastic opening tool to remove the ribbon wire from inside the camera

Step 13

  • Remove the viewfinder assembly from the camera

Remove the viewfinder assembly from the camera

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Vicente Rios

Member since: 01/25/2017

708 Reputation

                                      6 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team 9-4, Banghart Winter 2017                        

                                                  Member of Cal Poly, Team 9-4, Banghart Winter 2017 



                    CPSU-BANGHART-W17S9G4                     


                                            4 Members                     


                                            11 Guides authored