Difficulty
Moderate
Steps
8
Time Required
10 minutes
Sections
1
- LCD
- 8 steps
Flags
0
BackFujiFilm FinePix S4500
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD
- Remove the two 3.5 mm Phillips #1 screws in these positions on the left side of the camera with a screwdriver.
Remove the two 3.5 mm Phillips #1 screws in these positions on the left side of the camera with a screwdriver.
1024
Step 2
- Remove the three 3.5 mm Phillips #1 screws in these locations on the bottom of the camera with a screwdriver.
Remove the three 3.5 mm Phillips #1 screws in these locations on the bottom of the camera with a screwdriver.
Step 3
- Remove the four 3.5 mm Phillips #1 screws in these positions on the right side of the camera with a screwdriver.
Remove the four 3.5 mm Phillips #1 screws in these positions on the right side of the camera with a screwdriver.
Step 4
- Use a plastic opening tool to separate the back panel from the camera on the left side.
Use a plastic opening tool to separate the back panel from the camera on the left side.
Step 5
- Use a plastic opening tool to separate the back panel from the camera on the bottom.
Use a plastic opening tool to separate the back panel from the camera on the bottom.
Step 6
- Use a plastic opening tool to separate the back panel from the camera on the left side, then remove the back panel from the camera.
Use a plastic opening tool to separate the back panel from the camera on the left side, then remove the back panel from the camera.
Step 7
- Use a plastic opening tool to separate the LCD screen from the camera.
Use a plastic opening tool to separate the LCD screen from the camera.
Step 8
- Flip up the black tab holding the LCD ribbon wire in place and remove wire.
Flip up the black tab holding the LCD ribbon wire in place and remove wire.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 4 other contributors
Vicente Rios
Member since: 01/25/2017
708 Reputation
6 Guides authored
Badges:
10
+7 more badges
Team
Cal Poly, Team 9-4, Banghart Winter 2017
Member of Cal Poly, Team 9-4, Banghart Winter 2017
CPSU-BANGHART-W17S9G4
4 Members
11 Guides authored
