Difficulty
Moderate
Steps
16
Time Required
25 minutes
Sections
2
- LCD Screen
- 11 steps
- Viewfinder
- 5 steps
Flags
1
Missing Prerequisites
This guide is missing information on how to start the process. Make a prerequisite guide!
BackFujifilm FinePix S4200
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
LCD Screen
- Turn the camera off.
- Turn the camera upside down so that the battery compartment is showing.
Turn the camera off.
Turn the camera upside down so that the battery compartment is showing.
1024
Step 2
- Remove the three 4 mm screws from the bottom of the camera with a Phillips #000 screwdriver.
Remove the three 4 mm screws from the bottom of the camera with a Phillips #000 screwdriver.
Step 3
- Rotate camera to the side where the speaker ports are located.
- Remove the three 4 mm screws with a Phillips #000 screwdriver.
Rotate camera to the side where the speaker ports are located.
Remove the three 4 mm screws with a Phillips #000 screwdriver.
Step 4
- Turn the camera to the opposite side where the HDMI port is located.
- Remove all five 4 mm screws with a Phillips #000 screwdriver.
Turn the camera to the opposite side where the HDMI port is located.
Remove all five 4 mm screws with a Phillips #000 screwdriver.
Step 5
- Casing is fragile.
- Utilize the plastic opening tool to pry in between the back casing of the camera from the front casing.
- Continue this motion around the camera to create a wedge between the front and back casing of the camera.
Casing is fragile.
Utilize the plastic opening tool to pry in between the back casing of the camera from the front casing.
Continue this motion around the camera to create a wedge between the front and back casing of the camera.
Step 6
- Use force to pull apart the back casing from the camera.
Use force to pull apart the back casing from the camera.
Step 7
- Remove the two 4 mm screws that hold the motherboard and metal plate in place.
Remove the two 4 mm screws that hold the motherboard and metal plate in place.
Step 8
- Utilize the plastic opening tool to gently lift the LCD screen away from the metal plate.
- Flip over LCD screen so that the left side of the metal plate is visible.
Utilize the plastic opening tool to gently lift the LCD screen away from the metal plate.
Flip over LCD screen so that the left side of the metal plate is visible.
Step 9
- Rotate the camera vertically so that it is easier to manage.
- Use a Phillips #000 screwdriver to remove the two 4mm screws that are located on the metal plate under the LCD screen.
Rotate the camera vertically so that it is easier to manage.
Use a Phillips #000 screwdriver to remove the two 4mm screws that are located on the metal plate under the LCD screen.
Step 10
- Detach the metal plate from the motherboard.
Detach the metal plate from the motherboard.
Step 11
- The orange ribbon cable is fragile.
- Pull back the small black latch connecting the orange ribbon cable to the motherboard.
- Gently remove the LCD screen from the motherboard.
The orange ribbon cable is fragile.
Pull back the small black latch connecting the orange ribbon cable to the motherboard.
Gently remove the LCD screen from the motherboard.
Step 12
Viewfinder
- Remove the two 4 mm screws with a Phillips 000 screwdriver under the viewfinder.
Remove the two 4 mm screws with a Phillips 000 screwdriver under the viewfinder.
Step 13
- Carefully pull off the plastic cover from the view finder.
Carefully pull off the plastic cover from the view finder.
Step 14
- Remove the two 3mm screws surrounding the viewfinder with a Phillips 000 screwdriver.
Remove the two 3mm screws surrounding the viewfinder with a Phillips 000 screwdriver.
Step 15
- Orange ribbon is fragile.
- Using the plastic opening tool, pull down the small black latch to remove the orange ribbon from the mother board.
Orange ribbon is fragile.
Using the plastic opening tool, pull down the small black latch to remove the orange ribbon from the mother board.
Step 16
- Pull the viewfinder up to remove it from the body of the camera
Pull the viewfinder up to remove it from the body of the camera
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 5 other contributors
Melissa Burciaga
Member since: 09/14/2015
140 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
CSU Fullerton, Team 1-4, Bruce Fall 2015
Member of CSU Fullerton, Team 1-4, Bruce Fall 2015
CSUF-BRUCE-F15S1G4
4 Members
6 Guides authored
