Fujifilm Finepix S4200 Lcd Screen Replacement Repair Guide

Difficulty

Moderate

Steps

11

Time Required

                          15 minutes            

Sections

1

• LCD Screen
• 11 steps

Flags

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

• BackFujifilm FinePix S4200

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              LCD Screen               

• Turn the camera off.
• Turn the camera upside down so that the battery compartment is showing.

Turn the camera off.

Turn the camera upside down so that the battery compartment is showing.

1024

Step 2

• Remove the three 4 mm screws from the bottom of the camera with a Phillips #000 screwdriver.

Remove the three 4 mm screws from the bottom of the camera with a Phillips #000 screwdriver.

Step 3

• Rotate camera to the side where the speaker ports are located.
• Remove the three 4 mm screws with a Phillips #000 screwdriver.

Rotate camera to the side where the speaker ports are located.

Remove the three 4 mm screws with a Phillips #000 screwdriver.

Step 4

• Turn the camera to the opposite side where the HDMI port is located.
• Remove all five 4 mm screws with a Phillips #000 screwdriver.

Turn the camera to the opposite side where the HDMI port is located.

Remove all five 4 mm screws with a Phillips #000 screwdriver.

Step 5

• Casing is fragile.
• Utilize the plastic opening tool to pry in between the back casing of the camera from the front casing.
• Continue this motion around the camera to create a wedge between the front and back casing of the camera.

Casing is fragile.

Utilize the plastic opening tool to pry in between the back casing of the camera from the front casing.

Continue this motion around the camera to create a wedge between the front and back casing of the camera.

Step 6

• Use force to pull apart the back casing from the camera.

Use force to pull apart the back casing from the camera.

Step 7

• Remove the two 4 mm screws that hold the motherboard and metal plate in place.

Remove the two 4 mm screws that hold the motherboard and metal plate in place.

Step 8

• Utilize the plastic opening tool to gently lift the LCD screen away from the metal plate.
• Flip over LCD screen so that the left side of the metal plate is visible.

Utilize the plastic opening tool to gently lift the LCD screen away from the metal plate.

Flip over LCD screen so that the left side of the metal plate is visible.

Step 9

• Rotate the camera vertically so that it is easier to manage.
• Use a Phillips #000 screwdriver to remove the two 4mm screws that are located on the metal plate under the LCD screen.

Rotate the camera vertically so that it is easier to manage.

Use a Phillips #000 screwdriver to remove the two 4mm screws that are located on the metal plate under the LCD screen.

Step 10

• Detach the metal plate from the motherboard.

Detach the metal plate from the motherboard.

Step 11

• The orange ribbon cable is fragile.
• Pull back the small black latch connecting the orange ribbon cable to the motherboard.
• Gently remove the LCD screen from the motherboard.

The orange ribbon cable is fragile.

Pull back the small black latch connecting the orange ribbon cable to the motherboard.

Gently remove the LCD screen from the motherboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 6 other contributors 

                    Jackie Acevedo                     

Member since: 09/14/2015

304 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       CSU Fullerton, Team 1-4, Bruce Fall 2015                        

                                                  Member of CSU Fullerton, Team 1-4, Bruce Fall 2015 



                    CSUF-BRUCE-F15S1G4                     


                                            4 Members                     


                                            6 Guides authored                     

lise.didion - Apr 23, 2021

Reply

Ou peut on trouver cet écran ?