Difficulty

Moderate

Steps

7

Time Required

Suggest a time??

Sections

2

  • LCD Screen
  • 2 steps
  • Flash Mechanism Latch Spring
  • 5 steps

Flags

3

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackFujifilm FinePix S2980

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              LCD Screen               
  • Use a PH0 screwdriver to remove four screws on the right side, three screws on the bottom, and four on the left side to take off the rear plate.

Use a PH0 screwdriver to remove four screws on the right side, three screws on the bottom, and four on the left side to take off the rear plate.

1024

Step 2

  • Remove the three screws holding the LCD screen in place.
  • Replace with new screen.

Remove the three screws holding the LCD screen in place.

Replace with new screen.

Step 3

              Flash Mechanism Latch Spring               
  • Remove the two screws from underneath the flash mechanism.
  • Remove the two screws placed on the right and left sides of the camera.

Remove the two screws from underneath the flash mechanism.

Remove the two screws placed on the right and left sides of the camera.

Step 4

  • Pry the top of the camera off using the given tool

Pry the top of the camera off using the given tool

Step 5

  • Remove two silver plated screw from under the top of the camera, under the flash.

Remove two silver plated screw from under the top of the camera, under the flash.

Step 6

  • Remove the rectangular plastic piece.

Remove the rectangular plastic piece.

Step 7

  • Insert new spring.
  • Replace the plastic piece.

Insert new spring.

Replace the plastic piece.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 

                    Megan Merlo                     

Member since: 03/24/2015

78 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       UMass Dartmouth, Team 4-2, Vijaybhaskar Spring 2015                        

                                                  Member of UMass Dartmouth, Team 4-2, Vijaybhaskar Spring 2015 



                    UMASSD-VIJAYBHASKAR-S15S4G2                     


                                            3 Members                     


                                            6 Guides authored